START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Scale Helicopters, For Sale *No Commercial Ads - Scale Helicopters Only |
|
LinkBack | Thread Tools | Display Modes |
01-08-2013, 08:38 PM | #1 (permalink) |
Registered Users
|
[SOLD] Bell 212 / UH-1N Trex 450 Scale project [SOLD]
I've lost interest in this project, and I'm selling it off. I've test flown the mechanics a dozen times with the raised tail, 360mm blades and a 10T pinion and it flies really well actually. I've installed nav lights, but you'll need to tidy up the wiring.
Here is what is included: RC Areodyne UH-1N Scale Fuselage -I've painted in the Cal Fire paint scheme. I'm not an excellent painter or anything and can use some touching up. -Comes with all the parts needed to complete the fuselage -Raised tail mechanics installed. Trex 450 SE Mechanics -Mostly clone parts -450 pro Flybar Head, from eBay, no brand, works great though. -HK922MG Cyclic Servos (one is sorta glitchy sometimes, but works fine for the most part, will include a spare though) -Airtronics 94819 Tail servo -Turnigy Typhoon 2218 3450kv motor -Turnigy Plush 40A ESC. Note: This is not the ESC I have been using with this heli, and I haven't used the 40A for a while, but I'm 99% sure it still works but I haven't tested it. Think of it as more of a bonus item, not part of the price. -Detrum GY48V Gyro -360mm Tarot blades -335mm blades (I did start to paint these ones, but stopped because I ordered the 360mm blades) Extra parts- (What you see in the pictures is what you get) -Misc extra parts for the rotor head -Extra tail parts -4 Main shafts -2 Feathering shafts -10T, 11T and 13T pinions -Tail Blades -Extra set of flybar paddles. $260 Shipped Last edited by Libtekguy; 01-14-2013 at 11:33 PM.. Reason: SOLD |
Sponsored Links | |||
Advertisement |
|
Thread Tools | |
Display Modes | |
|
|