SBUS Issue

[augur]

Who need's so much channels with FBL. :-)

But would be cool if telemetry would work either. I can live with 11 channels with this adapter. ;-)

[mkovalcson]

Originally Posted by augur

Who need's so much channels with FBL. :-)

But would be cool if telemetry would work either. I can live with 11 channels with this adapter. ;-)

I have no current or planned use for that many channels at this point.

It may just be one of the many cool features I don't end up using. But there are a whole lot of really cool features that will be using

[Fruitbat]

Nevermind, I worked out the problem.. couldnt delete the post though!
Cheers
Dave

[audio131]

change in radio reciever setting from fasstest 14 to fasstest 12

[Pampaflieger]

but not a final solution because of missing telemetrie.

[audio131]

maybe,, i know my radio is reading the reciever voltage. still got ch 8-12.. .. atleast its working with the sk540. better than nothing,right?

[Kenzo]

Originally Posted by audio131

change in radio reciever setting from fasstest 14 to fasstest 12

I have tried this solution but then the receiver does not connect anymore to the radio.
i can also not rebind the receiver again with the radio.

did you had to reprogramm the receiver?

[audio131]

probably.. try it,it wouldnt hurt

[dpelletier]

Has this been resolved... can you use sbus and telemetry with the R7008SB receiver connected to an SK fbl?

Or the R7003SB?

Thanks

[omerco]

Originally Posted by Kenzo

I have tried this solution but then the receiver does not connect anymore to the radio.
i can also not rebind the receiver again with the radio.

did you had to reprogramm the receiver?

i think you need to change the radio also to 12 for it to work. that's how it usually is with futaba.

[TBur]

I've been switching my fleet over to futaba (14SG) this winter, thought I'd share what is working for me.

I have 2 720/BE with the 7008(mode 2), fasst-12CH, sending back flight pack and BEC voltages.
I have one 720/BE with a 6303SB(high speed mode), fasst-7ch.

tested both configurations for failsafe both turning off TX and removing power to RX.
In both cases the 720 cut throttle and went to failsafe postion on the collective.