300x tail servo not centering???

[leokat001]

Hi all,
I just got a 300x with a dx6i both new. I have completed the radio setup and the binding process 9have not tried to fly yet). My question is about the tail servo not going to center when I let go of the yaw stick is this normal?

Thank you

[KiloXray]

Originally Posted by leokat001

Hi all,
I just got a 300x with a dx6i both new. I have completed the radio setup and the binding process 9have not tried to fly yet). My question is about the tail servo not going to center when I let go of the yaw stick is this normal?

Thank you

Totally normal. Go maiden that bird!

[leokat001]

Thank you that is really good to know... So is it the gyro telling me that it is the one in control (; ?

[floreos]

Noooo use simulator first!!! save money!

[sn00p]

Totally normal because your in heading hold not rate mode....

If you wanted to check you can simply turn the gyro gain to 50 (below 50 on the DX6i switch the HH off). Your servo will then act like any other servo on the heli and return to centre.... this is how you would set the servo horn and rod length when setting up