reprogramming 100lv jive

[Guiwee]

Hey guys I had my jive 100lv hooked up to a ikon and now im on a bx.
I will just need to reprogram the endpoints right (100/!00).
Or just do modes 1,4,9, again? I want to run gov store.
Oh and also have a linear tc in normal corret??

[Wh1teAfr1can]

Originally Posted by Guiwee

Hey guys I had my jive 100lv hooked up to a ikon and now im on a bx.
I will just need to reprogram the endpoints right (100/!00).
Or just do modes 1,4,9, again? I want to run gov store.
Oh and also have a linear tc in normal corret??

you shouldn't have to as long as you are on the same tx because the ikon just passes throttle through and so does the BX

[Guiwee]

Originally Posted by Wh1teAfr1can

you shouldn't have to as long as you are on the same tx because the ikon just passes throttle through and so does the BX

I guess I should have said I also changed my radio from dx8 to 9..seems they're somewhat different

[taosgraveyard]

Definately do a mode one reset, then 4 then 9

[Wh1teAfr1can]

Originally Posted by Guiwee

I guess I should have said I also changed my radio from dx8 to 9..seems they're somewhat different

Originally Posted by taosgraveyard

Definately do a mode one reset, then 4 then 9

+1 go through and reprogram.

[Andy from Sandy]

I want to run gov store.

I see mode 4 as not really a stored mode. On spool up the esc will take the pack voltage into account every time.

I consider mode 11 a stored mode as it will store the rpm on first spool up after programming and in theory be the same rpm with all of your packs. Hence Kontronik need you to use your worst pack on first spool up.