Register Now

Relisys190 · 02-25-2015, 03:04 PM

http://www.rc-tek.com/store/i2rc-hig...hub-p2320.html
http://www.rc-tek.com/store/image.ph...9&window=popup

Anyone running this new setup? It has M2.5 bolts instead of aligns M2 size

I am running I2rc's tail grips along with aligns PRO hub. But for no other reason than bolt size thinking about upgrading this for durability.

Anyone else have one? thoughts. Thanks.

Gladius · 02-25-2015, 03:13 PM

I was running the same setup as you, and loved it. But I was having some (self-induced) bearing issues, and Bob helped me out. I picked up the new hub at that time, and it's great for piece of mind. I haven't gotten to fly it much, since I crashed after only 20 flights or so, and since then, I've been focusing on my 600. I don't think it's needed, but it was only $25 if you have the grips already.

rcflyerheli · 02-25-2015, 09:45 PM

I'm running 3 of his tails, the 500, 600SX and 700 Trex. couldn't be happier. My 700 Trex DFC is the smoothest heli that I own.

Relisys190 · 02-26-2015, 07:24 PM

Thanks for the input guys

MGPTWEGB · 03-01-2015, 07:05 AM

I don't think u could go wrong with I2 parts. Nice stuff from a good guy.

Mateyhv · 03-22-2015, 06:30 PM

I use the Pro tail hub/grips on an ESP and honestly don't see the need to replace them only because of the bigger bolts. Head speed 2800rpm

02-25-2015, 03:04 PM	#1 (permalink)
Relisys190 Registered Users Join Date: May 2011	I2rc tail hub W/grips http://www.rc-tek.com/store/i2rc-hig...hub-p2320.html http://www.rc-tek.com/store/image.ph...9&window=popup Anyone running this new setup? It has M2.5 bolts instead of aligns M2 size I am running I2rc's tail grips along with aligns PRO hub. But for no other reason than bolt size thinking about upgrading this for durability. Anyone else have one? thoughts. Thanks. __________________ LINKS * G700c BRAIN2 * T-rex 500 308DUO 450x #429

02-25-2015, 03:13 PM	#2 (permalink)
Gladius Registered Users Join Date: Nov 2012 Location: Maryland	I was running the same setup as you, and loved it. But I was having some (self-induced) bearing issues, and Bob helped me out. I picked up the new hub at that time, and it's great for piece of mind. I haven't gotten to fly it much, since I crashed after only 20 flights or so, and since then, I've been focusing on my 600. I don't think it's needed, but it was only $25 if you have the grips already. __________________ <> Trex 600 ESP FBL, Trex 500 ESP FBL, Gaui X3, Oxy 3 <> <> Builds in progress: Logo 600SX, Synergy 516 <> *Spartan Vortex VX1e*

02-25-2015, 09:45 PM	#3 (permalink)
rcflyerheli Registered Users Join Date: Apr 2010	I'm running 3 of his tails, the 500, 600SX and 700 Trex. couldn't be happier. My 700 Trex DFC is the smoothest heli that I own. __________________ Specter 700, Logo 700, Logo 690SX, Goblin 700, Trex 700DFC, Gaui X7, Trex600EFL Pro, Trex 600 ESP, Trex 500 ESP, DJI 550 Amain Hobbies Team Rep Last edited by rcflyerheli; 02-27-2015 at 06:40 PM..

02-26-2015, 07:24 PM	#4 (permalink)
Relisys190 Registered Users Thread Starter Join Date: May 2011	Thanks for the input guys __________________ LINKS * G700c BRAIN2 * T-rex 500 308DUO 450x #429

03-01-2015, 07:05 AM	#5 (permalink)
MGPTWEGB Registered Users Join Date: Jan 2014	I don't think u could go wrong with I2 parts. Nice stuff from a good guy. __________________ KDS Agile 6.4 Proto-Type 750MX 12s with an Ikon / KDS Agile 7.2 / Tarot-Align 600CF-FBL Robird G31 12S / The First X3-385 FROM AUTO-CAD to DIRT NAP in 10 SECONDS !

03-22-2015, 06:30 PM	#6 (permalink)
Mateyhv Registered Users Join Date: Mar 2011	I use the Pro tail hub/grips on an ESP and honestly don't see the need to replace them only because of the bigger bolts. Head speed 2800rpm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in