Register Now

fransine · 04-26-2010, 01:10 PM

The minijazz ESC has a fixed helicopter mode (mode 4), which has governor enabled. About this the manual says:
"KONTRONIK recommends setting minimum RPM at 80% of full RPM"
I read that as the throttle setting should be 80-100%. Is that really true? I would expect it should be below 80% to give the governor some headroom.

The manual is here:
http://www.kontronik.com/images/stor...2009_09_15.pdf
t.
P.S. I can't find any specifications for the BEC voltage. Am I blind?

life2short1971 · 04-26-2010, 01:15 PM

I would think because of the low torque of the small motor you need to keep the rpms up.it makes sense. The bigger the motor the more torque the more headroom you can have.

04-26-2010, 01:10 PM	#1 (permalink)
fransine Registered Users Join Date: Sep 2007	kontronik minijazz 15, helicopter mode The minijazz ESC has a fixed helicopter mode (mode 4), which has governor enabled. About this the manual says: "KONTRONIK recommends setting minimum RPM at 80% of full RPM" I read that as the throttle setting should be 80-100%. Is that really true? I would expect it should be below 80% to give the governor some headroom. The manual is here: http://www.kontronik.com/images/stor...2009_09_15.pdf t. P.S. I can't find any specifications for the BEC voltage. Am I blind?

04-26-2010, 01:15 PM	#2 (permalink)
life2short1971 Registered Users Join Date: Jan 2009	I would think because of the low torque of the small motor you need to keep the rpms up.it makes sense. The bigger the motor the more torque the more headroom you can have. __________________ Scott Trex 500 / /3026-1600/CC Ice75 /3G /Ds510's/Torsion 430 fbl's Trex 450 pro/HK2221-8/ Ice 50 /HS-5065MG/325D's/Kbdd's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in