1sq V-cam w/ DX6i and Tactic

[SpringerKing]

Anyone out there have a 1sq vcam set up and working with a dxy6i with an anylink? I cannot seem to get mine to take video and flip at the switch functions and these keep getting assigned to my stick inputs... very confused.

any help will be great.

[SpringerKing]

So anyone out there running a v-cam with a DX6i and may be having trouble... Here is what I did.

I tried both in a Heli model and an Airplane Model. I got it to work in the airplane model, I had to set the Flaps to up 100 and down 100 for the Aux channel to have full travel in my Tx, and then in monitor i found that the FM/Gear switch was channel 5. Those two switchs were my free channels for programing. From there, once my channels were freed up and were in use, i followed the instructions, very slowly. follow steps 1-5 like the manual says.

The Key is, between switches, take a second or two before flipping the next one.

I set my FM/Gear switch as my Flip and my Flap/Gyro Switch as my Video. It works so far. I will update if I can get the Trainer switch to work as flip or not.