Speed runs!

[pugdavey]

Hi all got the sk gov working with the hw esc now so tried some speed runs in the fusion today. On one of my runs with 2100hs I got a dolphin at the end of the flat run quite bad? Also on a power loop it ballooned bad at the bottom of the loop and nearly craped myself :eek:

Sent from my LT26i using Tapatalk 2

[Skookum]

Set the software Preferences->Advanced, then try increasing the elevator damping gain on one cyclic bank.

[georgi UK]

=] we see various performance issues in here, the interface (heli) will produce adverse reactions when things are not being met aerodynamically for the SK to perform it's given task,

like everything balance is key here, get any area out and there will be performance issues, this is inherent in the heli design, blades, headspeeds, dampening etc,

the 540/720 is only as good as the machine it is fitted to, not the other way. my 540 when instructed to give attitude will hold that, Heathy (UK) recognizes this as laser accuracy, this is true.

I'm not saying the SK is limited to heli brands, but be sure to match the two, Marco's closing comments are " need to turn it down, it's too quick!" as if!!

[ame]http://www.youtube.com/watch?v=Z-6FoZ6LiqE&feature=player_embedded[/ame]

ask yourself, where is the difference?...

[pugdavey]

thanks will give it a try I must say the skookum has been the nicest fbl unit to setup i've had so far.

[NRPY]

Originally Posted by gmcallister

ask yourself, where is the difference?...

I would guess it is most likely a "feel" thing. As I recall, Marco (borntofly) is a VBar guy.