START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Align 3GX FBL System Align 3GX FBL Flybarless System Software and Hardware Support |
|
LinkBack | Thread Tools | Display Modes |
04-17-2014, 09:30 PM | #1 (permalink) |
Registered Users
Join Date: Nov 2008
|
3gx with dx 6i possible?
Hi guys i got a brand new 450 l dominator and got every thing all set up with software 3.1 on the 3gx. Im using sats only.
My problem is that the gyro function does not respond at all to gyro changes in my transmitter or via the computer software. I know it should be set up on aux 2 concerning the gyro function but i dont know how to do that in the dx6i transmitter. Any suggestions? Please cause the tail wags like its on xtc in the air and cant do anything about it. Greets Anthony |
Sponsored Links | |||
Advertisement |
|
04-18-2014, 12:30 AM | #2 (permalink) |
Registered Users
Join Date: Apr 2012
|
You can't use the 3gx and Sats only with a dx6i and have gain adjustment from your Tx. The 3gx maps tail gain to ch7 and you only have 6 on your Tx. You really need to get an external Rx to run the dx6i and 3gx or a 7ch or more Tx to run just Sats.
|
04-19-2014, 10:26 AM | #3 (permalink) |
Registered Users
Join Date: May 2013
|
Bonkievan is 100% right. I just want to add that I was lucky because I read about that constraint here in this forum before I bought any satellite receivers.
I use a full receiver on my Dominator 6S + one satellite rx plugged into the full rx. The additional satellite is not really necessary, just makes me feel better/more secure. All the cables needed for that setup came with the Dominator kit that also contained the 3GX. It works perfectly with my DX6i! Never had a better heli before.
__________________
DX9, DX6i, Align T-Rex 450L (6S) w. 3GX FBL, Blade 450-3D (resurrected with 3GX FBL), Blade 130X (retired), Blade 130S, Blade mQX, Blade nanoQX, Blade mSR (sold) |
Thread Tools | |
Display Modes | |
|
|