Whats your Goblin 570 setup

[Jmann841]

haha, thanks for the weights!

Seems to be consistent with other peoples postings.

[Pingletonme]

G570 yellow and orange
beginner less than 1 year fling / mild 3D / big air
stock blades main and tail, SAB quick release's
AR7200BX FBL
CC120HV edge
Pulse 3300mah 2s LiPo RX pack
Scorpion HK4025-1100
stock pinions
Pulse 5000mah 45c
BK7001's cyclic
Futaba BLS276SV tail
DX8 IU1 heed speed is 2000, IU2 is 2200- IU1 5:30 flights , IU2 4:30 , 20% left in packs
using the gov in the CC120 the RPM only differs +/-30 RPM.

[Aryemis]

Here is mine
has yet to be flown though

• Flight Style: Big air,Mild 3d
• FBL System: SK540
• Motor: Xnova 4025-560kv
• Pinion: Stock 21t
• Target Headspeed(s): 2000-2300
• ESC: YEP 80HV
• Governor: SK gov
• RX Pack: 2S 1300 lipo
• RX: Frsky X8R
• Cyclic Servos: MKS HBL 950
• Tail Servo: MKS HBL 980
• Main Blades: Stock 570
• Tail Blades: Stock 95
• LiPos: 2x Turnigy 6S 3300 30C
• Anything Else: 21t tail pulley, will probably stretch to 615's later on.
• Weight: 3.9kg with lipos.

[NSFlyer12]

Still to maiden. Hope to this week depending on weather.

• Flight Style: Sport, Mild 3d
• FBL System: Spartan Vx1e
• Motor: Quantum 4125-560kv
• Pinion: Stock 21t
• Target Headspeed(s): 2000-2300
• ESC: YGE 90HV
• Governor: YGE Gov
• Bec: CC 20A
• RX: JR Dmss
• Cyclic Servos: MKS HBL 665
• Tail Servo: Xpert 2201
• Main Blades: Stock 570
• Tail Blades: Stock 95
• LiPos: 2x Zippy 6S 3300 35C

[Starving Bushman]

Didn't wan to post until maiden. That was yesterday and all went well.

• Flight Style: Sport, Big Air
• FBL System: BD3SX
• Motor: Scorpion 4025-550
• Pinion: Stock 21t
• Target Headspeed(s): 2000, 2200, 2400
• ESC: Jive 80+ HV
• Governor: Jive mode 4
• RX Pack: Gens Ace 1300mah
• RX: Futaba R7008SB
• Cyclic Servos: Torq 9180
• Tail Servo: Torq 9188
• Main Blades: SAB Blackline 570 3d
• Tail Blades: Edge 95
• Tail Blades: Stock 95
• Flight Pack: Pulse 3000 mah stick pack
• Extras: KDE landing gear, Secraft servo arms V2, Lynx main gear, SHS quick release canopy mount, telemetry for rx pack and flight pack

[opps]

FBL System: AR7200BX
Motor: Scorpion 4025-1100kv
Pinion: Stock 23t
Target Headspeed(s): 2400
ESC: HobbyWing V3 100A
Governor: Above
BEC: ServoKing 40A Bull BEC
Cyclic Servos: ServoKing BLS-880HV
Tail Servo: ServoKing BLS-896iHV
Main Blades: Stock
Tail Blades: Stock
LiPos: GensAce 6s 5000mah 50c

[OyvindB]

• Flight Style: Sport, Mild 3d
• FBL System: Spartan Vx1n
• Motor: Scorpion 4025-1100kv
• Pinion: Stock 21t
• Target Headspeed(s): 2000-2300
• ESC: Jeti Mezon 90
• Governor: Jeti Mezon 90
• Bec: Jeti Mezon 90
• RX: Jeti Rsat2
• Cyclic Servos: Servoking DS-695 HV
• Tail Servo: Servoking DS-DS695i HV
• Main Blades: Stock 570
• Tail Blades: Stock 95
• LiPos: GensAce 6S 5000 45C

[JWeber]

Finally got everything ordered today for BF.

Goblin 570: Yellow
· Flight Style: Sport and learning 3D
· Tx: Taranis w/ Telemetry
· FBL System: Ikon
· Motor: Savox 550kv
· Pinion: 23T to start with
· Tail Pinion: Standard
· Target Headspeed(s): 2200-2500
· ESC: Scorpion Commander 90HV
· Governor: Ikon
· BEC: CC BEC Pro
· RX Pack: None
· Cyclic Servos: BK 7001HV
· Tail Servo: BK 7005HV
· Main Blades: Stock 570
· Tail Blades: Stock 95
· LiPos: Glacier 3000mah X 2

[btheli]

Mods, sticky please?

[Guiwee]

Originally Posted by btheli

Mods, sticky please?

Ive asked before but to no avail!! Ill make a personal appeal this time

[D_Vail]

Yea, this should be up there with the 500 thread.

[Akoni]

Goblin 570/6s
· Flight Style: Sporty smoothness
· Target Headspeed: 1900-2000
· Motor: Xnova 4025 / 1120kv
· Pinion: 21t and 19t
· Tail Pinion: Standard
· ESC: YGE 120 LV
· Governor: YGE Gov store
· FBLU: Ikon
· BEC: WR Super BEC g2
· Cyclic Servos: BK BLS8001
· Tail Servo: BK BLS8005
· Main Blades: SAB Blackline 2D 570mm
· Tail Blades: SAB 95mm
· LiPos: Gens Ace 6s/5300

[Dany5]

GOBLIN 570 Carbon Edition.

• Flight Style: Sport,lite 3d
• FBL System: Ikon
• Motor: Xnova 4025-560kv
• Pinion: 20t
• Target Headspeed(s): 2000-2200
• ESC: Edge 80HV
• Governor: Ikon
• Bec :CC Bec pro
• RX: 2X DSMX Sats
• Cyclic Servos: BK DS-7001HV
• Tail Servo: BK BLS-8005HV
• Main Blades: Stock 570
• Tail Blades: Stock 95
• LiPos: 2x Pulse 3000 45C
• Anything Else: 21t tail pulleys. SAB Servo Arms. Lynx main gear

[btheli]

GOBLIN 570 6S

• Flight Style: Sport, light 3D
• FBL System: iKON (Spirit as soon as it gets here)
• Motor: KDE 500XF-1350kv
• Pinion: 18t
• Target Headspeed(s): 2000/2200/2400
• ESC: CC Edge 130
• Governor: Ikon
• Bec :WR Super Mini G2
• RX: 2x DSMX Sats
• Cyclic Servos: BK DS-7001HV
• Tail Servo: BK DS-7005HV
• Main Blades: Stock 570
• Tail Blades: Stock 95
• LiPos: 3x Glacier 5800 45C
• Anything Else: Lynx main gear and skids, UG 430, SEcraft servo arms.

[RichKnapp]

GOBLIN 570 6S

• Flight Style: Sport, light 3D
• FBL System: bD 3SX
• Motor: Quantum 4125-1100kv
• Pinion: 21T
• Target Headspeed(s): will decide once I fly it.
• ESC: CC Edge 130
• Governor: CC internal
• Bec none: 2S 1800mAh Rx lipo
• RX: 2x DSMX Sats
• Cyclic Servos: BK DS-7001HV
• Tail Servo: BK DS-7005HV
• Main Blades: 600mm Zeals (May go Zeal 570's if watt draw is to high even for my mellow flying. Blades are cheaper than a new ESC. lol)
• Tail Blades: 92mm Zeals
• LiPos: Pulse 5000mAh 45C
• Anything Else: Lynx stretch kit, DFC kit, swash, main gear and skids. SAB servo arms.

[doubletap]

Building soon..

GOBLIN 570 6S
Flight Style: Novice Sport, Novice light 3D
FBL System: AR7200bx
Motor: Scorpion HKIII-4025-1100/Quantum 4125-1100
Pinion: stock 21
Target Headspeed(s): unknown for now
ESC: CC Phoenix 130
Governor: CC Phoenix 130
Bec : CC BEC PRO
RX: FBL UNIT w/ 1 sat dsmx
Cyclic Servos: BK DS-7001HV
Tail Servo: BK DS-7005HV
Main Blades: Stock 570
Tail Blades: Stock 95
LiPos: 4400 to 5000 packs
Anything Else: Lynx main gear/ 21t tail pully

This going to be my first GOBLIN build would really appreciate all the input that i can get..
thanks in advance...

[D_Vail]

Originally Posted by doubletap

started shopping for Goblin 570 6s setup

GOBLIN 570 6S
Flight Style: Novice Sport, Novice light 3D
FBL System: AR7200bx
Motor: Scorpion HKIII-4025-1100
Pinion: stock 21
Target Headspeed(s): unknown for now
ESC: CC Phoenix 80hv
Governor: CC Phoenix 80hv
Bec : CC BEC PRO
RX: FBL UNIT w/ 1 sat dsmx
Cyclic Servos: BK DS-7001HV
Tail Servo: BK DS-7005HV
Main Blades: Stock 570
Tail Blades: Stock 95
LiPos: 4400 to 5000 packs
Anything Else: Lynx main gear

This going to be my first GOBLIN build would really appreciate all the input that i can get..
thanks in advance...

For a 6s setup, you'll need more than an 80amp ESC. Minimum 120a I believe. I run a 120a on mine. The people who are running 80A ESC's are running a 12s setup, which pulls less amps. For the motor you have listed, max continuous amps is 100 and peak is 130.

[doubletap]

Originally Posted by D_Vail

For a 6s setup, you'll need more than an 80amp ESC. Minimum 120a I believe. I run a 120a on mine. The people who are running 80A ESC's are running a 12s setup, which pulls less amps. For the motor you have listed, max continuous amps is 100 and peak is 130.

i will change it with 120 hv or 130 would work not HV though.. thanks

[D_Vail]

Originally Posted by doubletap

i will change it with 120 hv or 130 would work not HV though.. thanks

[emoji106]

[doubletap]

I was thinking if i have trex 500 packs 3300 and 3200 i can go for 12s setup just get a 560kv motor 80hv esc and bec pro.. But yet thinking of the technicality of the setup.