Show Us Your X50E

[laoheli]

TT X50E FBL
Align 600MX Motor
CC ICE 100
Savox SV0220MG Servo
Hyperion DH20xGCD Tail Servo
AR7200BX

[almigurt]

Sorry for the big picture. I can't attach files using my android...Setup:
X50e
Helitec ninja neon yellow 600mm
Helitec neon tail blades 105mm (not on pic)
Yge 120lv@7.4V+2x 4700uF caps
Plettenberg orbit 25-08HE 1220kv, 12t pinion
Graupner hbs 880/770 bb mg Servos
P-ion 6s powered (prismatic liion celles )
Fusuno Rushie
Gt5.2 beta

[Aziego]

Bought X50 at the end of August, now it is my go to heli. Did not like the stock canopy so i bought the white frp canopy and gave it a go at painting a high contrast scheme of flourescent orange and dark blue. Should do well for me.

[DT75]

Setup :

- 3 x bls253's
- Vbar 5.3 express / bls251
- Xera 4035 / 480kv, 16T pinion
- Jive 80hv
- 12s / 3500mah SLS lipo
- 1810 - 2270rpm headspeed

As I built for 12s, I ditched the plastic main bearing blocks in favour of the alu ones,
and then used the four "extra" frame spacers to stiffen up the frames below the mainshaft.

While ordering the bearing blocks and pinion, I also added the alu tail pitch parts and carbon gyro tray, just for bling.

The TT battery straps were too short, 365 x 25mm Lynx straps is a perfect fit.

Optional parts I purchased :

- PV 1406, metal upper bearing block
- PV 1407, metal lower bearing block
- PV 0466, metal tail pitch fork
- PV 0457, metal tail slider
- PV 1428, motor pinion 16T
- PV 1429, carbon gyro tray

[hobdean]

Mine

[Mow Manten]

Mine...

Love this bird!