GY/Normal Type setting in 14MZ Gyro menu ??

[DenisFerrari]

Hi, starting programming my new T14MZ, one doubt :

In Gyro menu, what exactly is the difference in setting type to GY instead of Normal ?

I mean, with a Futaba GY gyro, is GY set to give an AVCS mode rate between 0 to 100% or between 0-50% to make it work in AVCS mode? And to make it work in Normal mode ?

On the contrary, is Normal setting (instead of GY) used - for NON Futaba Gyros - to set the rate range from 0-100% in AVCS mode and 0-100% in Normale Mode ?

In other words ... which is the conbinations to be used with Type and Rate settings with Futaba GY gyros and NON Futaba gyros ?

Apologize my big confusion, but I'm sure most of you know how it must be used and surely can help me!

Thank you very much and merry Xmas!!

[corona007]

If you notice when you change from norm to gy it will update the setting on it's own and does the calculation for you, When switching it from AVCS mode to normal it's just that.
Say you put it on AVCS and with a setting of 10. Now its in HH mode
Say you put it o NORM and with a setting of 10. Now it's not in HH mode.
For instance my Spartan gyros are set TYPE Norm Rate 55
And my GY 611 is set to TYPE GY AVCS 32%
Hope I explained it better than it sounded in my brain....LOL

[tgo]

see reply start with *

Originally Posted by DenisFerrari

Hi, starting programming my new T14MZ, one doubt :

In Gyro menu, what exactly is the difference in setting type to GY instead of Normal ?
* set to GY for use with Futaba Gyro, or other brand Gyros that follow Futaba's setting method.

I mean, with a Futaba GY gyro, is GY set to give an AVCS mode rate between 0 to 100% or between 0-50% to make it work in AVCS mode? And to make it work in Normal mode ?
* Yes, select AVCS for head lock mode, you can set from 0 to 100% rates... normally around 30% for GY611. To use the Normal mode, select NORM mode. rates also from 0 to 100%

On the contrary, is Normal setting (instead of GY) used - for NON Futaba Gyros - to set the rate range from 0-100% in AVCS mode and 0-100% in Normale Mode ?

In other words ... which is the conbinations to be used with Type and Rate settings with Futaba GY gyros and NON Futaba gyros ?

Apologize my big confusion, but I'm sure most of you know how it must be used and surely can help me!

Thank you very much and merry Xmas!!

[DenisFerrari]

Excellent, thank you very much!

Now it should be clear enough.

Regards