Register Now

bj660raptor · 12-19-2012, 09:52 PM

Anyone running 693se and an 18t piniom for 2200-2250hs,and if so do you like it?

NTM · 12-20-2012, 01:15 AM

She's a big girl for 690mm blades.
Cyclic is extremely quick on 710mm, no worries there.

bj660raptor · 12-20-2012, 07:07 AM

Right on man,ill get a set of 713se's as i like how the se flys over the standard. Did mikado set a max recommended hs for this heli too?

sgrim80 · 12-20-2012, 07:16 AM

Quote:

Originally Posted by bj660raptor

Right on man,ill get a set of 713se's as i like how the se flys over the standard. Did mikado set a max recommended hs for this heli too?

I think its 2100rpm.

NTM · 12-20-2012, 01:27 PM

I wouldn't even flinch at spinning 710's at 2300.
The head is well, and truly way overbuilt.
Hell, I plan to spin 750mm blades at 2100 !

bj660raptor · 12-20-2012, 05:43 PM

Yeah i got ya,just thinking about the lipos lol,can you set 2200 in vbar as your max hs with a bone stock setup and still have gov headroom/good performance or do we need to step up to 18t.

OICU812 · 12-20-2012, 06:35 PM

you would need 18tooth to be that high with proper headroom yes. Thats with stock bundle yes.

Blink 182 · 12-20-2012, 07:04 PM

If the XX800 can swing 810mm at 2200 im sure the XX700 will have no issue with proper gearing.

12-19-2012, 09:52 PM	#1 (permalink)
bj660raptor Registered Users Join Date: Apr 2010	blades? Anyone running 693se and an 18t piniom for 2200-2250hs,and if so do you like it? __________________ 600 DFC HV Pilot Brandon J.

12-20-2012, 07:07 AM	#3 (permalink)
bj660raptor Registered Users Thread Starter Join Date: Apr 2010	Right on man,ill get a set of 713se's as i like how the se flys over the standard. Did mikado set a max recommended hs for this heli too? __________________ 600 DFC HV Pilot Brandon J.

12-20-2012, 05:43 PM	#6 (permalink)
bj660raptor Registered Users Thread Starter Join Date: Apr 2010	Yeah i got ya,just thinking about the lipos lol,can you set 2200 in vbar as your max hs with a bone stock setup and still have gov headroom/good performance or do we need to step up to 18t. __________________ 600 DFC HV Pilot Brandon J.

12-20-2012, 06:35 PM	#7 (permalink)
OICU812 Registered Users My HF Map location Join Date: Oct 2005 Location: Grande Prairie, Alberta	you would need 18tooth to be that high with proper headroom yes. Thats with stock bundle yes. __________________ ...Once upon a time there were Nitros, flybars & frequency pins...Shawn

12-20-2012, 07:04 PM	#8 (permalink)
Blink 182 Registered Users Join Date: Mar 2010	If the XX800 can swing 810mm at 2200 im sure the XX700 will have no issue with proper gearing. __________________ (´・ω・`)

12-20-2012, 01:15 AM	#2 (permalink)
NTM Registered Users Join Date: May 2006	She's a big girl for 690mm blades. Cyclic is extremely quick on 710mm, no worries there.

12-20-2012, 01:27 PM	#5 (permalink)
NTM Registered Users Join Date: May 2006	I wouldn't even flinch at spinning 710's at 2300. The head is well, and truly way overbuilt. Hell, I plan to spin 750mm blades at 2100 !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in