Register Now

Took · 11-10-2012, 11:48 AM

Wondering if there is a secret to binding these two together? Also if your currently using this setup can you tell me your settings. Thanks again for any info, tips, and tricks!

Sent from my iPhone using Tapatalk

Took · 11-11-2012, 11:07 AM

Anyone?

Sent from my iPhone using Tapatalk

renefigueroa · 11-11-2012, 04:37 PM

I have a 9503 and I do the usual. Plug in the battery on the heli and then start the TX while holding the bind button. I think you hold it for a few seconds and let go. I am going on 180 flights and so far so good

Took · 11-11-2012, 07:48 PM

Can you pm your settings. I am new at this and need somewhere to start on the settings

Sent from my iPhone using Tapatalk

AlarmedBread · 11-12-2012, 05:34 AM

Just use the DX7 settings from the sticky thread, everything is the same. Or watch the Finless video he uses the x9303.

https://www.helifreak.com/showthread.php?t=289344

renefigueroa · 11-12-2012, 08:30 AM

Quote:

Originally Posted by AlarmedBread

Just use the DX7 settings from the sticky thread, everything is the same. Or watch the Finless video he uses the x9303.

https://www.helifreak.com/showthread.php?t=289344

+1.

renefigueroa · 11-12-2012, 08:34 AM

Are you very new at this? The reason I ask is that I do have some pretty tame settings for the McpX. They helped me a lot when learning CP. PM me if you would like them

Took · 11-12-2012, 08:53 AM

Quote:

Originally Posted by renefigueroa

Are you very new at this? The reason I ask is that I do have some pretty tame settings for the McpX. They helped me a lot when learning CP. PM me if you would like them

Pm sent. Thanks for the info everyone.

Sent from my iPhone using Tapatalk

Ronnieguy1954 · 09-21-2016, 07:03 PM

Quote:

Originally Posted by renefigueroa

I have a 9503 and I do the usual. Plug in the battery on the heli and then start the TX while holding the bind button. I think you hold it for a few seconds and let go. I am going on 180 flights and so far so good

So my question is? when your JR XP9303 does not have a bind button then how do you bind the receiver. Sorry I'm new at this
Ron

Heliwhisperer · 09-25-2016, 11:52 AM

The JR XP9303 is not a 2.4ghz radio.

You must use a transmitter module to convert the 75mhz to the 2.4mhz protocol.

http://www.horizonhobby.com/SPMMSJR7...FYJehgod_ckGfA

HW.

Toadster25 · 10-08-2016, 07:48 AM

I know my 9303 was FM and I added the 2.4 module but weren't some of the last ones made 2.4 before they came out with the 9503? It seems like they used the trainer switch on the top left to as a bind switch. Just hold it when you turn it on or something. I don't have one so I can't say for sure but I thought that was how they did it.

11-10-2012, 11:48 AM	#1 (permalink)
Took Registered Users Join Date: Oct 2012	Binding with JR x9303 Wondering if there is a secret to binding these two together? Also if your currently using this setup can you tell me your settings. Thanks again for any info, tips, and tricks! Sent from my iPhone using Tapatalk __________________ JR x9303 TREX 500,Blade 400 3d, Blade SR, Blade MCP X v2 (Project), HK250SR (project bird) . And the Shrink said find a relaxing hobby

11-11-2012, 11:07 AM	#2 (permalink)
Took Registered Users Thread Starter Join Date: Oct 2012	Anyone? Sent from my iPhone using Tapatalk __________________ JR x9303 TREX 500,Blade 400 3d, Blade SR, Blade MCP X v2 (Project), HK250SR (project bird) . And the Shrink said find a relaxing hobby

11-11-2012, 07:48 PM	#4 (permalink)
Took Registered Users Thread Starter Join Date: Oct 2012	Can you pm your settings. I am new at this and need somewhere to start on the settings Sent from my iPhone using Tapatalk __________________ JR x9303 TREX 500,Blade 400 3d, Blade SR, Blade MCP X v2 (Project), HK250SR (project bird) . And the Shrink said find a relaxing hobby

09-25-2016, 11:52 AM	#10 (permalink)
Heliwhisperer Registered Users Join Date: May 2013 Location: Pittsburgh,Pa.	The JR XP9303 is not a 2.4ghz radio. You must use a transmitter module to convert the 75mhz to the 2.4mhz protocol. http://www.horizonhobby.com/SPMMSJR7...FYJehgod_ckGfA HW. __________________ . Some people drink from the fountain of knowledge, others just gargle. Robert Anthony.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-11-2012, 04:37 PM	#3 (permalink)
renefigueroa Registered Users Join Date: May 2012	I have a 9503 and I do the usual. Plug in the battery on the heli and then start the TX while holding the bind button. I think you hold it for a few seconds and let go. I am going on 180 flights and so far so good

11-12-2012, 05:34 AM	#5 (permalink)
AlarmedBread Registered Users Join Date: Sep 2012	Just use the DX7 settings from the sticky thread, everything is the same. Or watch the Finless video he uses the x9303. https://www.helifreak.com/showthread.php?t=289344

11-12-2012, 08:34 AM	#7 (permalink)
renefigueroa Registered Users Join Date: May 2012	Are you very new at this? The reason I ask is that I do have some pretty tame settings for the McpX. They helped me a lot when learning CP. PM me if you would like them

10-08-2016, 07:48 AM	#11 (permalink)
Toadster25 Registered Users Join Date: Feb 2005	I know my 9303 was FM and I added the 2.4 module but weren't some of the last ones made 2.4 before they came out with the 9503? It seems like they used the trainer switch on the top left to as a bind switch. Just hold it when you turn it on or something. I don't have one so I can't say for sure but I thought that was how they did it.

Register Now

Log-in