Pictures of your Night rig

[Ecklund1]

Originally Posted by DoctorAudio

I am sorry, but the N-vison fins look better!
If I did not have anything to do with it, I would still buy the N-Vison fins.
There is much more detail and light!
Everyone must make there own mind. It is just my opinion!
It is not as clean a setup, either!
Those that have bought a set please post pictures!
Thanks Elvan Wilson II!

Elvan, STOP turning every post into a sell job. I'm sure there's a peddler's SubForum for that. And yers, read the Thread Title.

Originally Posted by Shef

Elvan - I'm not throwing any punches here and you shouldn't either. Please re-read the thread topic....I just posted what have and that it works very well.

Looks good Shef.

[trinitybrown]

Both Videos and Pictures are really good, thanks for sharing with us

[victor pawlik]

www.glowire.com
www.rc-lights.com
Hope this helps.

[jhheli]

I like those fins on Shefs heli I see Rick makes them for trex 600 I probably would need 2 or 2.5m cold string to get the boom and those fins wrapped

[ZephanRC]

Here's a couple of shots of my setup on my 600N. Simple setup, but works good. Maiden night flight was last night. Man! it's a gas to fly at night. I have the older (NiMH), MSCompsite baldes, the new tail blades and using Glowire.com drivers and wire.

[matchless]

Here is my own setup.

Align blades and Electrifly glow wire.... I will likely add to the glow wire again and try to increase the sight picture of the canopy.....

[Spectre1770]

Here is my little 450 night set up. I run the glow wire and the K&B night blade LED at 7.4 volts from 2 cells of my 3 cell lipo, straight from the 2nd wire on the balance plug. No extra batteries, no extra weight, and not too much voltage to my glow driver..

[Rich M]

I use the xerogear leds and ms composite main and tail blades. i like the leds because they are bright enough to light up the ground when you are below about 15 to 20 feet. https://www.helifreak.com/showthread.php?t=97990 Here is a link to some pics

[SlowWhite]

Anyone know the set up Nick Maxwell did for his night flying at Ircha this year. Seems like his Heli was extremely bright. (I can't find the video anymore however)

[ziggymonster]

Just some pics of my bird, it's a trex 450se.




T-Rex 450se DX6i tx.
HiTect HG5000 & hsg-5083mg on tail
HS-65mg for cyclic
Jazz 40-6-18 , JGF 450th
Align night blades
2 meters ELwire
T.P. 25c 2200 3s

[marked23]

Here's mine.

[rdlohr]

Originally Posted by marked23

Here's mine.

Sweet! How did you light your tail blades?
Rick

[marked23]

Those are 107mm MS night tail blades. http://www.heliproz.com/prodinfo.asp?number=150100

[rdlohr]

Originally Posted by marked23

Those are 107mm MS night tail blades. http://www.heliproz.com/prodinfo.asp?number=150100

Other than the price, those are quite sweet! Thanks.
Rick

[ziggymonster]

Just flying in the back 40.with my sexy rexy 450se that is.

[nexgen]

Not mine, but a guy's sweet Xerogear setup at a funfly I went to a couple weeks back.

The pics looked cool so I thought I'd post em. Super bright I must say. This thing would light up the ground for about 10-15ft around the bird. Even from up to 20 ft or so off the deck, you could still see the ground under it!!:





Makes for some great trails at night:

[ziggymonster]

Almost need sun glasses. Sick light trails tho

[toptun69]

Video1:

HeliStrobe demonstration (3 min 17 sec)

Video2:

Versions of stroboscope for a helicopter model (3 min 40 sec)

Some info: http://www.rcgroups.com/forums/showthread.php?t=1088163

[rdlohr]

INTENSE!
Rick