START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Beam Beam Helicopters Factory Support Forum |
|
LinkBack | Thread Tools | Display Modes |
09-02-2012, 11:08 AM | #1 (permalink) |
Registered Users
Join Date: Jan 2011
|
On a e4 advance fbl v2, is a head speed of...
I just updated my esc to a cc phoenix ice lite 50 and I'm using governor mode, my setup is 13t pinion, 150 main, align 450m motor (6pole 3500kv) running it @ 94.9% my head speed is 2877 in rpm setting, My question is this a good setup? Or should I up the pinion to a 15t for a higher head speed? No hard 3d just sport with flips, rollers, and inverted flying. Thanks
__________________
Current Align 700L v2 and 500x previous heli's align 600e, 450 pro, blade 600x, 230s, X3,-Blade nano, mcpx bl, 450 3d, mcp x v1 and v2, msr and mcx, 450x and beam v2 |
Sponsored Links | |||
Advertisement |
|
09-02-2012, 11:46 AM | #2 (permalink) |
Join Date: Mar 2011
|
I think the manual says 3100 for 3d and 2900 for sport. I like it faster when doing loops so I don't stall at the bottom of the loop.I have my normal at 3000,st1 3300,st2 3400.I fly in wind most of the time and the high headspeed makes it easier to control.I think the governor would like it better with a 14 so it has more room to control(15 might be to much)?
Steve |
09-02-2012, 12:03 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2011
|
I think I will try bigger pinion, just checked battery voltage after a flight of 5.20 min. they come in @ 3.81v per cell with the current setup, so I have room to play with I think.
__________________
Current Align 700L v2 and 500x previous heli's align 600e, 450 pro, blade 600x, 230s, X3,-Blade nano, mcpx bl, 450 3d, mcp x v1 and v2, msr and mcx, 450x and beam v2 |
Thread Tools | |
Display Modes | |
|
|