cal 30 liftoff failed

[helicoot]

well it was off the shelve and out in the yard for a short flight just to limber the cal 30 up after winter, as I spooled it up to take off and it lost power, then it looked like the main shaft moved sideways somewhat, It did after lifting up some and clearing the lower bearing block the main gear took out the clutch bell.
lucky for my grandson and I we saw it as it happened on the ground and not in the air.
so anyway I'm now looking for some parts
stop collar ( the part that caused the damage).
main gear
clutch bell and clutch liner
I used to get a lot of kyosho parts from Chris at rcheliworkz but they don't seem to have many now,
so any leads or guidance would be a great help thank you in advance Helicoot

[babyuh1]

Quest Japan is the owner of the Caliber line now.

[CNCPRO]

Keep in mind what the total of the parts cost will be. If you end up over $150 for the small qty. of parts your looking for. You can pick up a complete caliber 30 off craigslist or ebay for about that amount which may be the way to go.

Kyosho America lists them as In stock. Everything except the clutch lining, But I Imagine the lining from a Raptor 30 or the like would do the job.

http://www.kyoshoamerica.com/Mast-Stopper_p_1421.html

http://www.kyoshoamerica.com/DIS--Ma...0T_p_1398.html

http://www.kyoshoamerica.com/DIS--Cl...ey_p_1394.html

You might also try here, and there are others, But some of these parts are expensive If you can even find them.
https://ultimatetoys.com.au

If you can't get them from Kyosho America. Get back to me. I have these parts. But would rather not sell them. Although I would help you out If you can't find them somewhere else.

[helicoot]

Originally Posted by CNCPRO

Keep in mind what the total of the parts cost will be. If you end up over $150 for the small qty. of parts your looking for. You can pick up a complete caliber 30 off craigslist or ebay for about that amount which may be the way to go.

Kyosho America lists them as In stock. Everything except the clutch lining, But I Imagine the lining from a Raptor 30 or the like would do the job.

http://www.kyoshoamerica.com/Mast-Stopper_p_1421.html

http://www.kyoshoamerica.com/DIS--Ma...0T_p_1398.html

http://www.kyoshoamerica.com/DIS--Cl...ey_p_1394.html

You might also try here, and there are others, But some of these parts are expensive If you can even find them.
https://ultimatetoys.com.au

If you can't get them from Kyosho America. Get back to me. I have these parts. But would rather not sell them. Although I would help you out If you can't find them somewhere else.

sorry its been taking me so long to get back to this, work ugh!!
did find all parts at rcjapan (quest) only it would not work till I got set up with paypal again, after which it went off without any problems, thanks for the tips .helicoot