CC ICE 75A On the Carbon Protos

[terrabit]

Basically. No problems!

[Clintstone]

Originally Posted by kgfly

Thanks Dennis, I was about to do that when I decided to try a complete reset of the ICE75. I reset it to factory defaults, recalibrated the throttle and reconfigured it for my Protos and the problem was gone. CC support were friendly and responsive but could not explain the behaviour and they felt it was a problem with my motor (loose magnet maybe) or soldering (bad connection on one or more motor lead). The fact that a reset seems to have fixed the problem suggests to me it was not the motor or the connections. I am not yet 100% confident in the ESC again with only two packs through it since the reset,

Log a few flights in case you need the base line... If your problem returns it could be helpful... For Castle support...

[Cat1]

had a few requests for pics of the mod to get the ICE 75 (not light) into the carbon frame...here they are... no mods to frame but i don't think castle will be very understanding about warranty.. it runs nice and cool even with a little heat sink material missing..

the plastic capacitor cover gets replaced with heat shrink...and the sides are milled as shown..

Chris