START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Mikado Logo Helicopters Mikado Logo Helicopters Discussion |
|
LinkBack | Thread Tools | Display Modes |
02-01-2013, 02:51 PM | #1 (permalink) |
Registered Users
Join Date: Nov 2011
|
4035-560Kv
hi there guys ...
will a castle 80hv work with a 4035-560kv without burning out 10s setup i also have 610mm blades on there the motor is rated 120amps max i think |
Sponsored Links | |||
Advertisement |
|
02-01-2013, 06:13 PM | #2 (permalink) |
Registered Users
Join Date: Dec 2010
|
it is iffy. you will probably trigger the over current protection if you fly it too hard. if you run a 13tooth pinion and fly balls to the wall @ 2200rpm. then, no way.
I run the Castle 80HV on my logo600 with 12S and its been perfect for the last year.. but 10S will draw more current the 12S. in the end it would depend on the pinion you chose.
__________________
Greg MSH USA Heli Flight Team Mikado V Team Lynx |
02-01-2013, 06:42 PM | #3 (permalink) |
Registered Users
|
I cant speak for the Castle but I ran a JIVE 80HV for years with 10s on a 560 motor and it was fine. I'd think any 80a esc would work for you. I ran 2200 on 12T pinion.
__________________
Team Mikado USA!!! Team Scorpion! Logo 600SX - Scorpion 4035-560, 10s 4400 packs Logo 690SX - Stock Scorpion motor, 12s 4500 packs |
Thread Tools | |
Display Modes | |
|
|