Register Now

Socal500 · 11-07-2007, 11:35 AM

Will this motor handle 6S? I wanted to try out two 3S FP EVOs on a 19 tooth and see how it does.

rotodingo · 11-07-2007, 03:15 PM

I don't think you will have a useable head speed. Too fast. Even with a 18T pinion. You will need a slower motor.
Nicolas

Socal500 · 11-07-2007, 09:01 PM

With 18 I should hit about 3100, 3200 and running governor mode I think it would be very useable.

Finless · 11-07-2007, 10:57 PM

It will not handle 6S or even 5S. It will burn out... Ask me how I know. It cant handle the higher voltage. The 3025-12 can handle 5S but I didnt like it's performance.

Bob

Socal500 · 11-09-2007, 04:23 PM

Thanks

11-07-2007, 11:35 AM	#1 (permalink)
Socal500 My HF Map location Join Date: Nov 2007	Z3025-10 on 6S Will this motor handle 6S? I wanted to try out two 3S FP EVOs on a 19 tooth and see how it does.

11-07-2007, 10:57 PM	#4 (permalink)
Finless Team Taco VP My HF Map location Join Date: Nov 2005	It will not handle 6S or even 5S. It will burn out... Ask me how I know. It cant handle the higher voltage. The 3025-12 can handle 5S but I didnt like it's performance. Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-07-2007, 03:15 PM	#2 (permalink)
rotodingo Registered Users Join Date: Jul 2006	I don't think you will have a useable head speed. Too fast. Even with a 18T pinion. You will need a slower motor. Nicolas

11-07-2007, 09:01 PM	#3 (permalink)
Socal500 Thread Starter My HF Map location Join Date: Nov 2007	With 18 I should hit about 3100, 3200 and running governor mode I think it would be very useable.

11-09-2007, 04:23 PM	#5 (permalink)
Socal500 Thread Starter My HF Map location Join Date: Nov 2007	Thanks

Register Now

Log-in