GT5 strane behaviour ?

[HSC]

Hello !

Yesterday I have mount in my helicopter GT5.

The thing wich boders mee is next :

When I power up the system, sometimes the sistem do not want to but up ( let say from 10 shots 8 are good and 2 are notgood).

It is reacting like the reciver is not conected to the system ( but telemetry say reciver is present and also motor runing wich is konected separately to chanel 3 of reciver soo reciver is there.

Is this normal behavior with the GT5 or is only my unit ?

Anybodey have exsperiences with similar behavior., what should bee wrong ?

Thanx, Regards

[Euwan]

Not sure what you are trying to say, but from my understanding you can't move your controls?

I had this problem when I moved the heli while initialising, you have to keep it still

[rexxigpilot]

My GT5 never has a problem booting up. Now my V-Bar occasionally will.

I suspect you are touching and slightly moving your heli when you boot-up. Don't touch it after connecting power and see what happens.

[HSC]

Hello !
Yes, I can not move the controls,
Gyros don't work too.
If I diskonect the power and konect again, than is Ok...

[sbc]

Occasionally I have the same problem. I suspect I may have moved the heli while the gyro is initialising.