Register Now

salessa · 10-21-2014, 05:34 PM

anyone know whether these lipos will comfortably fit?
I'm miles away from my Logo so please excuse the question.

http://www.store.revolectrix.com/Rev...HV-label?ext=F

Raptorapture · 10-21-2014, 11:15 PM

Should fit just fine. Assuming dimensions are correct, it is just 3mm taller at 63mm than my 7S4800 70C Revo's. Looks like it will also fit the XX700 but with a possible contact with canopy edge.

Chippie13 · 10-22-2014, 04:57 AM

Hi I agree it should fit as I am using gensAce with following dimensions

http://www.goblinhobbies.co.za/batte...tery-pack.html

Dimensions: 189.11*43.65*73.43 mm (L*W*h)

Again assuming the dimensions are correct as I am at office and cant physically measure them at the moment sorry.

The height of the revos are less so no problem there. The width is slightly more but as it stands out towards the side it should not be a problem as mine definitely has more than 5mm gap between canopy and lipos at the moment on each side. Width is somewhat less on revos so also don't see any problem there.

Cheers

salessa · 10-22-2014, 03:05 PM

Thanks guys,, cant wait for that extra flight time.

Klinger · 10-26-2014, 04:53 AM

Flew them in my new 700 today so 800 wont be a problem

10-21-2014, 05:34 PM	#1 (permalink)
salessa Registered Users Join Date: Jan 2012	Revolectrix 5500mAh 7SHV 26.6V Lipo - 70C SILHV label anyone know whether these lipos will comfortably fit? I'm miles away from my Logo so please excuse the question. http://www.store.revolectrix.com/Rev...HV-label?ext=F

10-26-2014, 04:53 AM	#5 (permalink)
Klinger Registered Users Join Date: Oct 2005	Flew them in my new 700 today so 800 wont be a problem __________________ 800 XXtreme, 700 Xxtreme, pimped to the max 2 x Logo 600 V-Bar, Pyro, Jive HV 90, 9451's, 9256 480 Xxtreme, Pimped, HVBK Serves, Best 500 out there! Just gotta love that smell of electric flight :!: Align - NEVER

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-21-2014, 11:15 PM	#2 (permalink)
Raptorapture CHC Benefactor Join Date: Feb 2006 Location: Singapore	Should fit just fine. Assuming dimensions are correct, it is just 3mm taller at 63mm than my 7S4800 70C Revo's. Looks like it will also fit the XX700 but with a possible contact with canopy edge.

10-22-2014, 04:57 AM	#3 (permalink)
Chippie13 Registered Users Join Date: Jul 2011	Hi I agree it should fit as I am using gensAce with following dimensions http://www.goblinhobbies.co.za/batte...tery-pack.html Dimensions: 189.1143.6573.43 mm (LWh) Again assuming the dimensions are correct as I am at office and cant physically measure them at the moment sorry. The height of the revos are less so no problem there. The width is slightly more but as it stands out towards the side it should not be a problem as mine definitely has more than 5mm gap between canopy and lipos at the moment on each side. Width is somewhat less on revos so also don't see any problem there. Cheers

10-22-2014, 03:05 PM	#4 (permalink)
salessa Registered Users Thread Starter Join Date: Jan 2012	Thanks guys,, cant wait for that extra flight time.

Register Now

Log-in