Post Your 700Xxtreme Pics & Vids Here..

[BTB]

Lets see those 700Xxtreme pics and vids. I see that Mikado has started shipping out kits, and a few lucky guys have them in hand already. I wont have enough saved to buy my kit until the end of winter. So I need to live through you guys for a few months..

[sgrim80]

Here are some unboxing pics






































Electronics rough mounting started



Glamour shot! LOL

[Jesse Kavros]

I shall start off with the pictures then!




Jesse

[frankyay]

[OICU812]

frank, flown it yet? How long did the build take you and any concerns?

[frankyay]

Haven't fly yet until this weekend, still under setting up the Vbar gov. I have built for 2 nights long and found some concerns:-
- It's a bit difficult to put the 4mm pin throw the tail gear.
- The tail boom come with only 1 end holes pre-drilled, for the mainframe side need to be drilled (some steel chips will come off inside the torque tube and need to be remove after then)
- Need to be careful about steel chips from the pre-fabricated mainframe which come from I think chassis mounting bolts.

Loving the tail gear box and rotor so much and as well as the motor mount also...very nice.

Franky

[frankyay]

[frankyay]

[Mathias]

Really nice! What are your first flight impressions? Does it feel heavy?

[dahld]

"??Does it feel heavy??"

I think his answer will be necessarily subjective based on what's he's used to flying

The Logo 700 is a well balanced, well designed, well proven, and one tough heli mechanically. It also flies like a dream, and is well behaved.

BUT...if you're accustomed to the feel of very light helis with super high head speeds (say like a Goblin and the way they are often set-up), the Logo 700 will by any subjective measure, feel "heavy".

It doesn't look like it is suffering from any lack of performance (again, a subjective point of view). But a Goblin it's not (thank goodness)

(-: Dave

[frankyay]

The 1st flight impression is "XXTREME STABLE"

After some fine tune for my new bird, I agreed what Kyle said Logo 700 is a well balanced, well designed coz the response of cyclic and also the power is much enough. I used to fly 690 blade for my CF frame 600SE before in 2050rpm (3rd party blade grip), but I noted my new bird can cater much higher cyclic pitch and of coz even in higher rpm as well. I will try to keep on my flying report but unfortunately, my flying skills like a mess...

Cheers

Franky

[frankyay]

[prototype3a]

Just noticed the little fan behind your motor. Is that standard or something you added?

[frankyay]

it's not a standard gear, just a cooling fan after each flights

[peihao83]

guys,

i have a problem on my yge 160gv with vbar silverline.

1) do i need to do the throttle calibration on my tx? do i connect the yge rx cable to vabr or to my rx? i'm using sbus.

2) The motor spool up only when my throttle is around 70%. Do i need to do some setting on vabr gov 2 settings?

Pls advise..

Thanks a lot.

[sgrim80]

Originally Posted by peihao83

guys,

i have a problem on my yge 160gv with vbar silverline.

1) do i need to do the throttle calibration on my tx? do i connect the yge rx cable to vabr or to my rx? i'm using sbus.

2) The motor spool up only when my throttle is around 70%. Do i need to do some setting on vabr gov 2 settings?

Pls advise..

Thanks a lot.

To answer question 1, yes to throttle calibration...do it in the vbar software. YGE rx cables goes to vbar NOT receiver.

Watch this video.

[ame]http://www.youtube.com/watch?v=OMWJzsnKbBI[/ame]

[peihao83]

Originally Posted by sgrim80

To answer question 1, yes to throttle calibration...do it in the vbar software. YGE rx cables goes to vbar NOT receiver.

Watch this video.

http://www.youtube.com/watch?v=OMWJzsnKbBI

Many thanks for the advise and video. Will try out tonight..

[frankyay]

Another one Logo700 in here

[10pilot]

Just flew mine today for the first time. Got it Thursday evening and had it built by Friday morning (4 am! I was too excited to leave it alone). It flies just amazing. Took it easy on the flight just to get a feel for it. Never set up a vbar governor before and yge is new to me. It was a HUGE (I mean really HUGE) hit at the field. I'm using MKS 950/980HBL servos and spektrum dsmx satellite receivers.

[10pilot]

Hope to have a video posted in a few hours. As for how it feels, mine actually felt very light on the sticks. I set 9 degrees on the cyclic and 65 on the acceleration for the tail. I also set mine up for precise and 40 on the pitch pump. Realize I only have two flights on it so far so ill probably adjust those settings. It's just so precise! It stops where you want it. Effortless!! I fly a Goblin, too. But also have a Compass 7HV and two 700e's. So far the logo was more exciting than all of them. Just my opinion...