Register Now

tealc · 07-04-2016, 06:19 PM

I have a 8FG and with the new update my CGY-750 will not show "N" on the home screen for Ele and Ail gains. The gain % will change when I flip the switch (between Normal and AVCS) but "A" always shows. Since the update has merged the Elevator and Aileron gains (which I don't understand why this function would be merged), I went into the 8FG gyro menu to try and get both Elevator and Aileron gains on channel 9. It will not let me put 2 functions on the same channel. So, how do I set the CGY-750 up to show "N" when I switch the switch into "Normal" or rate mode.

Dr.Ben · 07-30-2016, 09:02 PM

There is no rate mode with v2.0 firmware, and both ail and ele trans gain are called head gain and are controlled by a single channel.

Ben Minor

07-04-2016, 06:19 PM	#1 (permalink)
tealc Registered Users Join Date: Jun 2010	New problem for me I have a 8FG and with the new update my CGY-750 will not show "N" on the home screen for Ele and Ail gains. The gain % will change when I flip the switch (between Normal and AVCS) but "A" always shows. Since the update has merged the Elevator and Aileron gains (which I don't understand why this function would be merged), I went into the 8FG gyro menu to try and get both Elevator and Aileron gains on channel 9. It will not let me put 2 functions on the same channel. So, how do I set the CGY-750 up to show "N" when I switch the switch into "Normal" or rate mode.

07-30-2016, 09:02 PM	#2 (permalink)
Dr.Ben Registered Users Join Date: Apr 2004	There is no rate mode with v2.0 firmware, and both ail and ele trans gain are called head gain and are controlled by a single channel. Ben Minor __________________ Team Futaba USA, Team Minicopter/Peak Aircraft, Team Kontronik USA, Kontronik Service USA repair.usa@kontronik.com Please do NOT PM me here on HF.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in