START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
nano CP X Brushless Mods Blade nano CP X Brushless Mods Information and Help |
|
LinkBack | Thread Tools | Display Modes |
12-21-2012, 10:23 AM | #1 (permalink) |
Registered Users
Join Date: Feb 2012
|
Settings check
I have been flying my nano BL for a couple of days now. It flies well as long as I am real easy on the collective. As soon as I give collective to recover out of a move, the motor bogs. So I started to look at my settings and see what my monitor on my DX8 states. I have a flat throttle curve at 72%, but the monitor on the DX8 states 43% for the throttle. Is this correct? Or do I have another setting that needs to be corrected? I was expecting the monitor to state 72%. BTW - I am flying new batteries as well. If the 43% is correct for the DX8 monitor I will have to look elsewhere. Pitch travel limit is setup as 85%.
__________________
Blade mCPx V2 / Blade 130X / Blade 300X Spektrum DX8 Phoenix |
Sponsored Links | |||
Advertisement |
|
12-22-2012, 10:22 PM | #2 (permalink) |
Registered Users
Thread Starter
Join Date: Feb 2012
|
I found the main reason my nano was bogging was because I was using 250 hyperion MCPx batteries with the mCPx skids - they are obviously too heavy for the nano mild BL. I went back to stock battery and it flies much much better.
Hopefully, someone can answer the DX8 monitor question of seeing 43% throttle when I have a 72% flat throttle curve. Am I missing a setting on my DX8? Anyone else have the same thing?
__________________
Blade mCPx V2 / Blade 130X / Blade 300X Spektrum DX8 Phoenix |
12-23-2012, 10:24 AM | #3 (permalink) |
Registered Users
Join Date: Aug 2011
|
Hi Finix,check Your settings for Dualrate and Travel Adjust. If Travel Adjust for Throttle Channel is 100% and YouŽve programmed a FLAT (i.e. horizontal) 72% Throttle Curve and Dualrate is switched of You should see 72% Throttle on each position of stick (Throttle Cut = 0 = Off = Motor on)
__________________
Ronny PKZTyphoonČ3D|GRAUPNER MX16HoTT+Spek|nCPx BL|ALIGN Rex450Pro DFC3GX V3.1|THUNDER TIGER E700 Raptor JLog2.6 |
12-24-2012, 11:44 AM | #4 (permalink) |
Registered Users
Thread Starter
Join Date: Feb 2012
|
Thank you for the response, Elektro. I checked the the travel adjust for the throttle channel is 100% and the throttle cut is switched to inhibit.
This was driving me crazy, so I finally figured it out. The monitor screen goes from -100% to 100% while throttle only goes from 0% to 100%. Therefore, the monitor screen is showing the functional value of the throttle. So, math was involved. The function of thottle to the monitor screen turns out to be y=2x-100 where x is the throttle curve and y is the monitor screen value. Therefore, a throttle curve x value of 72, equals a montor screen y value of 44 (~43). All is good again. I can keep flying happily.
__________________
Blade mCPx V2 / Blade 130X / Blade 300X Spektrum DX8 Phoenix |
Thread Tools | |
Display Modes | |
|
|