Fun, Learning, Friendship and Mutual Respect START  HERE
Register FAQ PM Events Groups Blogs Calendar Mark Forums Read


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Other Makes and Models Helicopters > Banshee Helicopters
Reload this Page Open ended 3mm 4mm open end / combo wrenches ?


Banshee Helicopters Banshee Helicopter Support


Reply
 
LinkBack Thread Tools Display Modes
Old 06-30-2014, 09:05 AM   #1 (permalink)
Registered Users
 
Posts: 28,522
 

Join Date: Apr 2011
Location: US
Default Open ended 3mm 4mm open end / combo wrenches ?
Do any of you have a source for a high quality 3mm & 4mm combo wrenches?

I used my needle nosed pliers on the tail for now, but would like to have something that fits in there nicely for the future.
__________________
Mark
Dusty Shelf queens: TDR2, TDR, Protos Max, Logo 550SX, Protos 500, Jeti DS-16, etc....
mkovalcson is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 06-30-2014, 02:01 PM   #2 (permalink)
Registered Users
 
Posts: 28,522
Thread Starter Thread Starter
 

Join Date: Apr 2011
Location: US
Default
Got these. Hopefully they will work well.

http://www.amazon.com/Moody-58-0161-...uctDescription
__________________
Mark
Dusty Shelf queens: TDR2, TDR, Protos Max, Logo 550SX, Protos 500, Jeti DS-16, etc....
mkovalcson is offline        Reply With Quote Quick reply to this message
Old 06-30-2014, 02:25 PM   #3 (permalink)
Registered Users
 
Posts: 4,309
 

Join Date: Mar 2007
Default Re: Open ended 3mm 4mm open end / combo wrenches ?
Those should work fine, I like the craftsman set http://www.hmcelectronics.com/produc...FY17fgodZaEAOQ

They have a combo open end set that goes smaller too.
__________________
Dylan ~ www.AstroidDesigns.com
Dylwad is offline        Reply With Quote Quick reply to this message
Old 07-02-2014, 01:03 PM   #4 (permalink)
Registered Users
 
Posts: 28,522
Thread Starter Thread Starter
 

Join Date: Apr 2011
Location: US
Default
The 5.5mm wrench fits the bolts inside the tail.

However with the spindle and belt gear in place it isn't quite small enough to fit back there. So the spindle will still need to be removed every time.
__________________
Mark
Dusty Shelf queens: TDR2, TDR, Protos Max, Logo 550SX, Protos 500, Jeti DS-16, etc....
mkovalcson is offline        Reply With Quote Quick reply to this message
Reply



« Previous Thread | Next Thread »

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
 Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright - Advertising - Contact Us - HeliFreak.com - Privacy Statement - Top

SEO by vBSEO 3.6.1