Super CP reach rotor head max speed at ~40% throttle?

[domcars0]

Hi,
I've made a strange discover on my SuperCP.... the max rotor head speed (RPM) is reached with ~40% of throttle channel? The rpm did'nt increase with higher throttle channel value (from 40 to 100%)?
I would like to know if this is the same on yours (or on your Genius or miniCP)?
Thanks.
Note: measure was made with a flat pitch curve set to 0°.

[MiniCPflyer0110]

Hmm... I don't have anything to measure my rpms, but this does sound very strange. Wen I raise the throttle on my mini though, I definitely hear the motor getting louder... Which would lead me to believe that my rpms do raise. Maybe check you travel adjust on throttle or somethng like that.

[domcars0]

Hi MiniCPflyer0110,
Thanks for your reply. I use deViation firmware and the throttle travel adj. is OK (also my FMODE0 TH curve which is a 1-1 curve)... I've had a look on my output channel monitor
and everything seems OK also (output channel value varies well from -100 to +100%)...
May be this thing does not exists on the miniCP just on the SuperCP (like the TC delay issue which exists on SuperCP and on MasterCP)?

[domcars0]

I just have bought a mini CP and I'm sure now that the Super CP max throttle is restrained (like the cyclic servos travel). And that's why Walkera says that the superCP is for beginner.