No beep or start from Motor

[Kavaman]

Hi All,

I was wondering if there are any common problems with the xxtreme motor or not? Since my Logo 600 is down I decided to finally finish my xxtreme....

I previously had the Motor run while on the bench, and then the Heli sat for a few months. Finished off today, did the set-up again and now do not seem to have any motor!

I am running a WR Bec. Have power to the servos and VBAR....just a dead motor.

Any thoughts on course of action or diagnostics will be highly appreciated.

Thanks,
Kavaman

[Euwan]

try the motor with another esc or try the esc with another motor if you are ble to

[sgrim80]

Is the motor plugged in? LOL just kidding.

[Big Fil]

Did you have the right model set in the radio? If so, also make sure your set to zero throttle. Most ESCs won't arm unless they see a zero throttle signal coming from the rx.

[shein95]

Originally Posted by Big Fil

Did you have the right model set in the radio? If so, also make sure your set to zero throttle. Most ESCs won't arm unless they see a zero throttle signal coming from the rx.

not sure about the zero throttle being the issue. i'm running my yge controlers with vbar gov and using the bail out feature so if i power up the heli with throttle hold on which is set at 30% to arm bail out it will not power up the motor until i hit throttle cut BUT it does still give the start up beeps.