C05M 11,500 light weight with video

[vtown nick]

I have a C05M that I have been looking at for quite some time now. I have no clue what version it is but am guessing its the 11,500 because it has a 1mm shaft and 2 strand wound. I mounted it on a V2 board as I have a bunch of them still laying around. It's final weight is 36g with the following mods -

C05M 11,500?
Oversky 10a pnp direct soldered
Oversky 7mm tail motor
lynx 42mm tail
lynx cf main shaft
lynx bl v2 swash
lynx bl metal main rotor hub
lynx 7mm tail mount
stock bl grips
stock v1/v2 hollow short tail boom
asteroid designs frame stiffener
nanotech 45c 300mah

This thing is sweet! Being 10g lighter than my hp05 mcpx it would give it a run for its money until I really load it up that is.

Mcpx Brushless (2 min 24 sec)

Here is the hp05 on the same batteries

Mcpx brushless hp05 300's (2 min 11 sec)

[StuckNaTree]

Looks like it works awesome! Good mod! Does the 7mm brushed tail hold pretty well? Would be nice to ditch this 120sr motor I am currently using.

[vtown nick]

Originally Posted by StuckNaTree

Looks like it works awesome! Good mod! Does the 7mm brushed tail hold pretty well? Would be nice to ditch this 120sr motor I am currently using.

Depends on what main motor you are running, if its a HP05 you need a 120sr or better. If you are running a C05M weather it be the 11,500 or the 13,500 the 7mm works wonders!

[billj33]

What pinion are you using? I wish mine fly like that. My C05 seems lazy and definitely doesn't fly like that?
Thanks,
Bill

[vtown nick]

It's a 8t - I built another one of these after this and it didn't have this much power but it was still close. These cheap motors are very inconsistent. My 2 HP05s were spot on with each other tho.