Register Now

johnbs8 · 10-12-2013, 07:17 PM

I won a warp heli combo kit (servos,motor,esc and tracx fbl) at a funfly and are really close to being done and doing a maden. i still have to mess with the tracx fbl settings and setup up the speed control. as far as the stock speedcontrol goes, is there any programing needing done or is it setup to fly with the stock motor out of the box?

johnbs8 · 10-13-2013, 08:33 PM

Does anyone use stock compass esc? Hello ??

MyRCode · 10-13-2013, 08:46 PM

That's the same as the ikon/brain... Just re-branded. Maybe try the MSH Brain forum?

Sent from my Nexus 7 using Tapatalk 4

Raz0rSh4rp · 10-13-2013, 08:55 PM

I would imagine it would be pnp but you should send an email to prostarhobby.com. they will have prompt and accurate information for you.

Sent from my SCH-I535 using Tapatalk

kachur779 · 10-13-2013, 09:53 PM

I would go over the settings on the esc ,hobby wing you always got to set you low voltge cut off ,and mtr timing,the ikon is no brainer to set up just turn your tail speed up default is pretty slow

NevErSn0w · 10-14-2013, 12:59 AM

I have the stock compass ESC and still have to set it up, gonna get a mate to do it for me, tracx is the same as the brain so just download the brain software do the firmware update and your set

Trex 500 esp, Compass Warp 360, Spektrum dx7s

1BADAIR · 10-21-2013, 09:41 PM

dang, what funfly?
what is the stock esc?

para5063 · 10-21-2013, 11:45 PM

The stock compass ESC is a rebranded YGE 60A.

NevErSn0w · 10-22-2013, 12:11 AM

Its slightly too thick to fit under the electronics tray so you put it in at a slight angle and it fits perf

Trex 500 esp, Compass Warp 360, Spektrum dx7s

uiron · 10-22-2013, 02:35 AM

strange, I recently fitted YGE60 V4 right under gyro and it's slightly narrower than the frame, much smaller than YEP45.

cbmd · 10-22-2013, 01:20 PM

Quote:

Originally Posted by para5063

The stock compass ESC is a rebranded YGE 60A.

The stock compass ESC is a rebadged YEP60.

uiron · 10-22-2013, 03:16 PM

that explains why it's so fat. when my yge60 arrived, I first though I got the wrong model as it looked so small besides bulky yep45.

10-12-2013, 07:17 PM	#1 (permalink)
johnbs8 Registered Users My HF Map location Join Date: Mar 2008	new warp build I won a warp heli combo kit (servos,motor,esc and tracx fbl) at a funfly and are really close to being done and doing a maden. i still have to mess with the tracx fbl settings and setup up the speed control. as far as the stock speedcontrol goes, is there any programing needing done or is it setup to fly with the stock motor out of the box? __________________ Mikado 550sx, TT X50N, Align 470L

10-13-2013, 08:33 PM	#2 (permalink)
johnbs8 Registered Users Thread Starter My HF Map location Join Date: Mar 2008	Does anyone use stock compass esc? Hello ?? __________________ Mikado 550sx, TT X50N, Align 470L

10-13-2013, 08:46 PM	#3 (permalink)
MyRCode Registered Users Join Date: Aug 2012	That's the same as the ikon/brain... Just re-branded. Maybe try the MSH Brain forum? Sent from my Nexus 7 using Tapatalk 4 __________________ Protos Max 800 \| Goblin 500 \| Gaui X3 \| Goblin 280 \| Oxy 2 MXP 150 \| CM Stigg FrSky Horus \| Spirit FBL \| CC and HW ESCs

10-13-2013, 08:55 PM	#4 (permalink)
Raz0rSh4rp Registered Users Join Date: Mar 2012	I would imagine it would be pnp but you should send an email to prostarhobby.com. they will have prompt and accurate information for you. Sent from my SCH-I535 using Tapatalk __________________ NX4\|Tri-Chronos\|Chronos\|7NT\|Specter700 Saje Marvin - Citizen 125

10-13-2013, 09:53 PM	#5 (permalink)
kachur779 Registered Users Join Date: Mar 2011	I would go over the settings on the esc ,hobby wing you always got to set you low voltge cut off ,and mtr timing,the ikon is no brainer to set up just turn your tail speed up default is pretty slow __________________ BLACKOUT MINI,ZMR 250,TBS Discovery ,Zephyr 2 TARANIS X9D + ,ez-uhf jr mod *GauiX5 Gauix3*

10-14-2013, 12:59 AM	#6 (permalink)
NevErSn0w Registered Users Join Date: Jan 2013	I have the stock compass ESC and still have to set it up, gonna get a mate to do it for me, tracx is the same as the brain so just download the brain software do the firmware update and your set Trex 500 esp, Compass Warp 360, Spektrum dx7s __________________ Darcy Brown- ZenRC Field Rep RED! Goblin 500, Quantum 4120-1200, BK Servos, from www.zenrc.com.au ORANGE! Goblin Speed, Kosmik Kool 200HV, Pyro 850-50L, BK Servos, Brain

10-21-2013, 09:41 PM	#7 (permalink)
1BADAIR Registered Users My HF Map location Join Date: Jun 2008	dang, what funfly? what is the stock esc? __________________ Compass 7HVU HBL980/950 Ar7200bx Edge160-- Compass 6HV, 610/650 TRex 700LE , Beastx 610/650, Warp360 TracX 92A+

10-21-2013, 11:45 PM	#8 (permalink)
para5063 Registered Users Join Date: Jan 2011	The stock compass ESC is a rebranded YGE 60A.

10-22-2013, 12:11 AM	#9 (permalink)
NevErSn0w Registered Users Join Date: Jan 2013	Its slightly too thick to fit under the electronics tray so you put it in at a slight angle and it fits perf Trex 500 esp, Compass Warp 360, Spektrum dx7s __________________ Darcy Brown- ZenRC Field Rep RED! Goblin 500, Quantum 4120-1200, BK Servos, from www.zenrc.com.au ORANGE! Goblin Speed, Kosmik Kool 200HV, Pyro 850-50L, BK Servos, Brain

10-22-2013, 02:35 AM	#10 (permalink)
uiron Registered Users Join Date: Apr 2012 Location: Vilnius, Lithuania	strange, I recently fitted YGE60 V4 right under gyro and it's slightly narrower than the frame, much smaller than YEP45. __________________ Goblin 700 Sport [spirit pro, hw130, xnova4525, bk kst servos, switch, gensace12s] Warp 360 [SK540, yge v4 and other antique electronics, radix/edge blades]

10-22-2013, 03:16 PM	#12 (permalink)
uiron Registered Users Join Date: Apr 2012 Location: Vilnius, Lithuania	that explains why it's so fat. when my yge60 arrived, I first though I got the wrong model as it looked so small besides bulky yep45. __________________ Goblin 700 Sport [spirit pro, hw130, xnova4525, bk kst servos, switch, gensace12s] Warp 360 [SK540, yge v4 and other antique electronics, radix/edge blades]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in