Register Now

waqr · 05-31-2014, 05:11 PM

I have flown many helis with the old ZYX version 1 (the white unit) but now I have switched to the S2 version (yellow unit) and the setting up program looks different and there are other parametres to adjust.

What I noticed during setup was that the program reacted really slowly to stick input (when setting up endpoint, centre stick etc.....) I took a while for the bars to move in the program after moving the sticks on the transmitter, is this correct?

Also, after the setup the swash compensates correct but the servos do not do this very smoothly. Is this correct?

Thanks!

waqr · 05-31-2014, 05:33 PM

I also just noticed that my servo on channel 2 (Align DS 610) has stop responded. Any ideas?

jbilliter · 05-31-2014, 07:29 PM

I have two S2's and one S. Sorry, I have not seen the problems you are having. The only thing odd I have seen is the S2s sometimes take a few power ons to initialize correctly. 2 or 3 or more times, the yellow led blinks.
I do notice some "safety" features. When setting up some stuff in the program some things quit working.
like throttle, or in some tabs the tail doesnt work. Cycle power brings them back though

05-31-2014, 05:11 PM	#1 (permalink)
waqr Registered Users Join Date: Jan 2011	Help with ZYX S2 I have flown many helis with the old ZYX version 1 (the white unit) but now I have switched to the S2 version (yellow unit) and the setting up program looks different and there are other parametres to adjust. What I noticed during setup was that the program reacted really slowly to stick input (when setting up endpoint, centre stick etc.....) I took a while for the bars to move in the program after moving the sticks on the transmitter, is this correct? Also, after the setup the swash compensates correct but the servos do not do this very smoothly. Is this correct? Thanks! __________________ Trex 700N (OS91 and BeastX) Trex 600N (OS55 and BeastX)

05-31-2014, 05:33 PM	#2 (permalink)
waqr Registered Users Thread Starter Join Date: Jan 2011	I also just noticed that my servo on channel 2 (Align DS 610) has stop responded. Any ideas? __________________ Trex 700N (OS91 and BeastX) Trex 600N (OS55 and BeastX)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-31-2014, 07:29 PM	#3 (permalink)
jbilliter Registered Users Join Date: Feb 2012	I have two S2's and one S. Sorry, I have not seen the problems you are having. The only thing odd I have seen is the S2s sometimes take a few power ons to initialize correctly. 2 or 3 or more times, the yellow led blinks. I do notice some "safety" features. When setting up some stuff in the program some things quit working. like throttle, or in some tabs the tail doesnt work. Cycle power brings them back though

Register Now

Log-in