Register Now

RcManChild · 06-15-2016, 08:08 PM

Does anyone know where I can get a good battery holder for the dynatron starter?
I know sullivan makes one that bid red and somewhat ugly....

I also know miniature aircraft (see pic) used to make one but I can no longer find it..

Anyone know anywhere I might be able to find something decent?

aziz76 · 06-16-2016, 02:06 AM

I think you will like this one:

https://www.helifreak.com/showthread.php?t=747068

RcManChild · 06-16-2016, 05:08 PM

I have seen that and have messaged him many times...
Hopefully he responds they look really nice and slick

Any other ideas.

Puttputt maru · 06-17-2016, 04:33 PM

If you already have a Makita drill with an 18V battery this is great:

http://www.afineredgemfg.com/

cyclenut · 08-28-2016, 12:33 AM

I thought about the makita setup, but in the end I have 2 Velcro straps around a 5s Lipo. The Lipo drops in right against the front plate and the black rubber button that runs down the side of the motor. May not be as cool as the makita, but works just fine and cost nothing since I already had an extra set of battery tie downs

Sent from my iPhone using Tapatalk

johncblacker · 08-29-2016, 09:09 AM

I wholeheartedly agree! This is the best thing since sliced bread. The convenience of not having wires hanging all over is wonderful. I have one setup for my helicopters and another one for my airplanes. I have a Makita drill and have three batteries. The batteries last a long time although I probably ought to charge them more often. The installation of the battery adapter was tricky, but if you proceed carefully, it goes on reasonably easy.

06-15-2016, 08:08 PM	#1 (permalink)
RcManChild Registered Users Join Date: Jun 2006	Dynatron Starter battery Holder Does anyone know where I can get a good battery holder for the dynatron starter? I know sullivan makes one that bid red and somewhat ugly.... I also know miniature aircraft (see pic) used to make one but I can no longer find it.. Anyone know anywhere I might be able to find something decent? Attached Thumbnails

06-16-2016, 02:06 AM	#2 (permalink)
aziz76 Registered Users My HF Map location Join Date: Dec 2011	I think you will like this one: https://www.helifreak.com/showthread.php?t=747068 __________________ *A\ziz - Citizen 672* Minicopter Diabolo 700 Black, SAB Kraken 700, Kraken 580, Minicopter Diabolo 600, Minicopter Diabolo 550, Henseleit TDR Mark II, Henseleit TDR Jeti DS24 / VControl Touch

06-17-2016, 04:33 PM	#4 (permalink)
Puttputt maru Registered Users Join Date: May 2009	If you already have a Makita drill with an 18V battery this is great: http://www.afineredgemfg.com/ Attached Thumbnails __________________ TDSF, TDR-II, Triabolo, 2 X TDR, Logo 700,Protos evoluzione, T-Rex 700Dominator, Drake & Raw, SpiritRS, Jeti DC-24,HW,Kosmik,Jive Pro EF MXS 3W110, Ultimate Aeroworks 20-300, DA 170, PowerBox Mercury, Q80-8M in a 91" EF Extra and MXS 104+ few jets

08-28-2016, 12:33 AM	#5 (permalink)
cyclenut Registered Users My HF Map location Join Date: Nov 2010	Dynatron Starter battery Holder I thought about the makita setup, but in the end I have 2 Velcro straps around a 5s Lipo. The Lipo drops in right against the front plate and the black rubber button that runs down the side of the motor. May not be as cool as the makita, but works just fine and cost nothing since I already had an extra set of battery tie downs Sent from my iPhone using Tapatalk __________________ --citizen 19-- ama#986265, W8RMB, T-Rex 700n 700e, 600n, 550X, 550e, 500 efl pro, 450 pro.. a couple of planks and a couple of quads...I am not a rep for anyone

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-16-2016, 05:08 PM	#3 (permalink)
RcManChild Registered Users Thread Starter Join Date: Jun 2006	I have seen that and have messaged him many times... Hopefully he responds they look really nice and slick Any other ideas.

08-29-2016, 09:09 AM	#6 (permalink)
johncblacker Registered Users Join Date: Oct 2013	I wholeheartedly agree! This is the best thing since sliced bread. The convenience of not having wires hanging all over is wonderful. I have one setup for my helicopters and another one for my airplanes. I have a Makita drill and have three batteries. The batteries last a long time although I probably ought to charge them more often. The installation of the battery adapter was tricky, but if you proceed carefully, it goes on reasonably easy.

Register Now

Log-in