Swash Rate (Static Pitch Question)

[micccain]

I upgraded my CGY750 to V2.0 last weekend. I have a T-Rex 700N and all of my links are 90deg where they should be and such but I'm still have issues with my cyclic. I'm getting about 1deg more pitch one direction than I am the other. Also my elevator pitch is less then my aileron. Should I base my 9deg of static pitch on the elevator (which has less pitch) or the aileron (which has more pitch)? I test flew it last week after the update and it seemed like my pirouettes weren't as flat as they were previously. What setting would help to adjust for this? Thanks.

[anthony1]

have a look at the swash detail menu , there is a lot of things in there to make things more accurate
Anthony

[micccain]

I have gone though the swash detail menu. I have trouble finding the settings though because sometimes it is hard to tell if my values are improving things or not.

[marc8090]

Don't know if you should go with whichever axis gives you the reading you want, the higher or the lower. But regarding the 1 degree difference in directions on a single axis, there have been numerous posts about not to worry at all about that.

[Dr.Ben]

Swash detail should be tuned for best flight performance, but the parameter to adjust for flat piros is the swash rate. Increase or decrease it in small increments until the wobble in fast piros is gone or the initial correction in precision, hovering piros accurate.

Ben Minor