Here is a TREX 600 for Realflight G3

I don't know why but there is no import listed on my simulator.
There is options and import should be right below it.

Any suggestions?

thanks in advance.

[MarkWebber]

Import is in the Simulation dropdown menu.

[ICHItheKILLER]

Can someone tell me how to set the blades for the trex600 download. I have G3 and the model has little blades and does not fly right. It says it does not have that blade size and substitutes with a pair it has.

thanks

MarkWebber stated: Import is in the Simulation dropdown menu.

Hi Mark, I should have made myself clear, sorry.

I went to the simulation drop down menu and there is no import listed.might this be an installation issue?? I am LOST...........

[ardian]

hello everybody ....
aim newbie from indonesia , i had trouble for my sim G3 coz i can install new model to my sim,anybody can help me how to install the model to G3 ? please........

[scottc]

http://www.knifeedge.com/forums/showthread.php?t=17482
follow the link and follow the directions.

[Scottlclem]

Anyone figure out how to get the wobble out of this heli? if a real heli flew like this it would explode!! I noticed some have the problem and some don't.. I do

[shredder777]

I have the exact same problem except I am using G4.

[oldschool269]

the wobble is to do with the pc .

i have 2 xp pc's with 3.5 , one works perfect
the other wobbles shocking .

it dosn't do it on g3 , just 3.5 and 4

Jason

[mwc273]

Just downloaded and installed on G4.5. Flys OK but tail oscillates like crazy! I don't see a gyro adjustment in the "edit aircraft" menu. Anyone figure it out yet?

[ChrisH]

It's under the Electronics submenu. Make sure you have "Display Advanced Properties" turned on in the options menu.

[Av8Chuck]

Originally Posted by helvetic

hmm, I don't get through! I cannot import a *.g3x file into my Realflight G3! Am I missing something?

SOLVED


Update to 3.5 done, everything ok!

I have the same problem, when I choose import from the Simulation drop down I get the same Import/Raw Panoramic Image. How did you solve this? What am I doing wrong?

Thanks

[ChrisH]

Do you mind posting a screenshot?

[Av8Chuck]

Originally Posted by trexflyer02

Do you mind posting a screenshot?

Its exactly the same as the screenshot in post 37, "helvetic's" post. Sorry the computer that RF is on is not on the internet or network.

Thanks

[Av8Chuck]

Thanks guys, figured it out. Upgraded from G3 to G3.5 which solved the problem of not seeing the g3x in the import dialog box then just followed the original directions. Works great.

But I am experiencing a little of the problem others have mentioned. If I let it sit on the ground after spooling up it nukes itself. Pieces really go flying. But if I lift off as I spool up at seems to be fine. Tail boom twitches a little but I like that, the TRex500 I'm training with does the same thing.

Anyway, thanks for the great thread.

~chuck

[jeremy cooksey]

can some one tell me where i can find an trex 600 esp for realflight g5. not doing any good lookn on knief edge swap.... thanks

[ChrisH]

No 600ESP has been made.

[N212LA]

[ame]http://www.youtube.com/watch?v=DC_3KevRmxY[/ame]