TBS Gemini FrSky BnF + Lipos + Spares + 3D-Printed Parts

[MyRCode]

The ESCs have been flashed with OneShot. For those of you that don't know too much about OneShot, there's some info here.

http://blog.oscarliang.net/oneshot12...uadcopter-fpv/

I'll also include the USB Afro ESC programming if you need to use it for anything else.

The Gemini is currently setup with the
TBS Boss 500 mw Vtx (http://team-blacksheep.com/products/product:109)
Improved 3D printed Mobius mount in Green - the Mobius slides right in, is at the correct angle and depth , and doesn't need any velcro / double-sided tape (http://www.thingiverse.com/thing:690498)
McMaste-Carr lock nuts and washers - no more lost props (http://www.mcmaster.com/#hex-nuts/=vq5uai
use p/n:93800A500
http://www.mcmaster.com/#standard-washers/=vq5uls
use p/n: 3573A12
and for standard washer
use p/n: 95610A550)

Current canopy is the clear film canopy. I was messing around with spray painting the inside and some of the paint has chipped off. The canopy is also cracked in the front, but there are two unused clear canopies included (see spare parts list below). I didn't like the way the stock canopies attach with magnets so I've switched it over to 3D printed canopy mounts + rubber bands (http://www.thingiverse.com/thing:667511).

Spare parts include
1x clear race canopy set
1x clear film canopy set
3x magnetic mounting tabs (if you wanted to go back to the stock canopy retention system)
1x NIP TBS Boss 500 mw Vtx (I was keeping this one as a spare)
1x 3D printed leveling stand (http://www.thingiverse.com/thing:671235)
5x sets of canopy mounts in various colors (see photos)
24x replacement props in various colors (see photos)
3x crash kits - Includes replacement motor plates, motor screws, motor fasteners, frame fasteners, camera fasteners, and motor mount dampeners (http://team-blacksheep.com/products/prod_kit)
All the stock parts that were replaced.

Lipos included are
1x Lumenier 3S 1800 mAh
3x Nano-Tech 4S 1000 mAh
1x TBS 1700 3S 1700 mAh
1x Lumenier 4S 10000 mAh

I'm looking to get $500 for everything shipped and PayPaled. I'm willing to entertain reasonable offers....lowball offers will be ignored.

If there are multiple interested parties, it'll go to the first person that actually PayPals..

[MyRCode]

BUMP - Price drop to $475

[MyRCode]

BUMP

[MyRCode]

Price drop to $450

[MyRCode]

Bump

[MyRCode]

BUMP - Price Drop to $425

[MyRCode]

BUMP

[MyRCode]

Decided to keep it!