Register Now

stuartmp74 · 09-21-2007, 03:07 AM

Fully Detailed, Trex 600 Nitro Pro - "VERSION 9"

Low Profile 3D Skids Added.
Black or White Skid Color schemes available, With either White or Red Canopy.
A few Minor Tweeks
DSS Loading Problem Fixed.

http://www.knifeedge.com/forums/down...o=file&id=3078

Please post - Your opinion of the model

This Trex was modeled from my new actual Model. All dimension & Mass are accurate. I taught myself 3ds Max during this process, What a great program.

Well this will be it for awhile. This model has take up a lot of my time.
I hope everyone who downloads this model enjoys it.

Post request to me if you like an Update, I will do them as I get time.
(3790 Downloads of Previous versions)

All feedback comments are welcome
Post request to me if you like an Update, I will do them as I get time.

Bayou Talker · 09-21-2007, 07:21 AM

You are the man!! Thanks for all the hard work to make this for us. I can't wait to download it and try it.

sarge · 09-22-2007, 12:14 AM

Hey mate,

I down loaded the file to my custom folder. When I go to look for it, it is not showing up when I run 3.5.
Can you tell me what I am doing wrong?

Thanks

stuartmp74 · 09-22-2007, 05:23 AM

How to install custom aircraft from the swap pages

http://www.knifeedge.com/forums/showthread.php?t=17482

sarge · 09-22-2007, 10:54 AM

Sweet.... I am up and flying

Thanks

fsusmithc2 · 09-26-2007, 09:52 AM

Black skids too? You must have been spying on me as I just added a set of black skids to my red 600N. This will be great! I can't wait to download this version and give it a shot.

Thanks again!

ssrobzoom · 12-03-2007, 05:24 PM

This version (version 9 of the Trex 600N)causes G4 to shut down abuptly, can you tell me what could be causing the shut of the Realflight program?

stuartmp74 · 12-06-2007, 03:09 AM

As I don't have G4 yet.
I can not test it.
Is anyone else have this problem?

I will look at the aircraft building info on the Knifeedge site to see if they have changed any requirments for G4.

MarkWebber · 12-06-2007, 04:50 AM

Loaded it on my G4 with no problems. Great heli!

Fievel · 12-09-2007, 04:56 AM

i am also having trouble loading the t-rex 600 it worked fine on G3.5 but when i put it on G4 it shuts the program done. whats going on?

MarkWebber · 12-09-2007, 06:20 AM

Strange, I just flew it on G4 15min ago. Did nothing special and have changed none of the parameters.

spdntckt · 12-16-2007, 10:23 AM

Yeah.. when i use this on G4 i get an "unexpected error" and RF just quits.. very strange...

R1R 7humbs · 12-24-2007, 12:04 AM

I also get an error 95% of the time when I try to use this aircraft in G4 (it works fine in G3.5).

spdntckt · 12-28-2007, 01:52 AM

FYI - for those running G4 and having problems with the v9 crashing RF.. i just loaded the v8 and it seems to work fine.. FWIW

stuartmp74 · 01-01-2008, 02:22 AM

Fully Detailed, Trex 600 Nitro Pro

This model is an upgrade or the Trex 600 Nitro Pro - "VERSION 9" That I did for Realflight G3.5 Some small changes were made

to try and solve some problems people were have after importing the G3.5 Model. Other than that it is still the same.

A special thanks to Phrank for helping me out as I do not have G4 yet.

All feedback is welcome. Download and Enjoy

http://www.knifeedge.com/forums/down...o=file&id=4197

joeyw · 01-09-2008, 01:36 PM

Thanks stuartmp74.

I am new to RC helicopters, already crashed my first one several times. So I ordered G4 and must say that I am happy with it. The 600 model you posted above seems to be a lot better than the helis included, can anyone with experience comment on how realistic it is compared to the real model?

fsusmithc2 · 01-10-2008, 10:05 AM

Always willing to go the extra mile Stuart. Kudos to you! It's fun for me just imagining how many people are flying my model around (the red one for those curious).

As an extra treat, if anyone has seen the newest (February) issue of RC Heli Mag, they have an article on using sims and the screeen grabs they took for their pictures are of Real Flight with my red T-Rex 600N as they model they were flying. It's a bit fuzzy but you can see where my Spektrum decal is in the yellow part. There's also a white O.S. decal on the red part in between the Align white painted logos but that's really hard to make out in the magazine pictures. But download this model and fly it close and you'll see.

I may not be famous but at least my model is. Thanks again Stuart!

zeddan78 · 01-17-2008, 06:32 AM

hi...i tried to play the trex 600n on the 3.5 but i cant seem to play it because it says OS 50 sx unable or something. pls help!

alanhf · 01-17-2008, 05:15 PM

Any chance of modding this to 600 Electric, please?

Mike Fortin · 01-28-2008, 09:13 AM

I have actually been flying the V9 for a few months now and really enjoy it on G3.5. I have made a few mods of my own but the model flys great.

09-21-2007, 03:07 AM	#1 (permalink)
stuartmp74 Registered Users Join Date: May 2007	Trex 600 Nitro Pro - "VERSION 9" Fully Detailed, Trex 600 Nitro Pro - "VERSION 9" Low Profile 3D Skids Added. Black or White Skid Color schemes available, With either White or Red Canopy. A few Minor Tweeks DSS Loading Problem Fixed. http://www.knifeedge.com/forums/down...o=file&id=3078 Please post - Your opinion of the model This Trex was modeled from my new actual Model. All dimension & Mass are accurate. I taught myself 3ds Max during this process, What a great program. Well this will be it for awhile. This model has take up a lot of my time. I hope everyone who downloads this model enjoys it. Post request to me if you like an Update, I will do them as I get time. (3790 Downloads of Previous versions) All feedback comments are welcome Post request to me if you like an Update, I will do them as I get time. Last edited by Finless; 09-29-2007 at 11:01 AM..

09-21-2007, 07:21 AM	#2 (permalink)
Bayou Talker Registered Users My HF Map location Join Date: Mar 2005	You are the man!! Thanks for all the hard work to make this for us. I can't wait to download it and try it. __________________ Cliff Hebert Custom Cut Graf-X--Helicopter Stickers and More!! Chattanooga Radio Control Club IRCHA #2557 AMA #814140

09-26-2007, 09:52 AM	#6 (permalink)
fsusmithc2 Registered Users My HF Map location Join Date: Feb 2007	Black skids too? You must have been spying on me as I just added a set of black skids to my red 600N. This will be great! I can't wait to download this version and give it a shot. Thanks again! __________________ AMA 879592 - IRCHA 3241

12-06-2007, 04:50 AM	#9 (permalink)
MarkWebber Registered Users My HF Map location Join Date: Mar 2006	Loaded it on my G4 with no problems. Great heli! __________________ Mark Webber wai-rc.com

12-09-2007, 06:20 AM	#11 (permalink)
MarkWebber Registered Users My HF Map location Join Date: Mar 2006	Strange, I just flew it on G4 15min ago. Did nothing special and have changed none of the parameters. __________________ Mark Webber wai-rc.com

09-22-2007, 12:14 AM	#3 (permalink)
sarge Registered Users Join Date: Apr 2007	Hey mate, I down loaded the file to my custom folder. When I go to look for it, it is not showing up when I run 3.5. Can you tell me what I am doing wrong? Thanks

09-22-2007, 05:23 AM	#4 (permalink)
stuartmp74 Registered Users Thread Starter Join Date: May 2007	How to install custom aircraft from the swap pages http://www.knifeedge.com/forums/showthread.php?t=17482

09-22-2007, 10:54 AM	#5 (permalink)
sarge Registered Users Join Date: Apr 2007	Sweet.... I am up and flying Thanks

12-03-2007, 05:24 PM	#7 (permalink)
ssrobzoom Registered Users My HF Map location Join Date: Jun 2005	This version (version 9 of the Trex 600N)causes G4 to shut down abuptly, can you tell me what could be causing the shut of the Realflight program?

12-06-2007, 03:09 AM	#8 (permalink)
stuartmp74 Registered Users Thread Starter Join Date: May 2007	As I don't have G4 yet. I can not test it. Is anyone else have this problem? I will look at the aircraft building info on the Knifeedge site to see if they have changed any requirments for G4.

12-09-2007, 04:56 AM	#10 (permalink)
Fievel Registered Users Join Date: Jun 2007	i am also having trouble loading the t-rex 600 it worked fine on G3.5 but when i put it on G4 it shuts the program done. whats going on?

12-16-2007, 10:23 AM	#12 (permalink)
spdntckt Registered Users Join Date: Feb 2007	Yeah.. when i use this on G4 i get an "unexpected error" and RF just quits.. very strange...

12-24-2007, 12:04 AM	#13 (permalink)
R1R 7humbs My HF Map location Join Date: Dec 2007	I also get an error 95% of the time when I try to use this aircraft in G4 (it works fine in G3.5).

12-28-2007, 01:52 AM	#14 (permalink)
spdntckt Registered Users Join Date: Feb 2007	FYI - for those running G4 and having problems with the v9 crashing RF.. i just loaded the v8 and it seems to work fine.. FWIW

01-01-2008, 02:22 AM	#15 (permalink)
stuartmp74 Registered Users Thread Starter Join Date: May 2007	New Version for G4 Fully Detailed, Trex 600 Nitro Pro This model is an upgrade or the Trex 600 Nitro Pro - "VERSION 9" That I did for Realflight G3.5 Some small changes were made to try and solve some problems people were have after importing the G3.5 Model. Other than that it is still the same. A special thanks to Phrank for helping me out as I do not have G4 yet. All feedback is welcome. Download and Enjoy http://www.knifeedge.com/forums/down...o=file&id=4197

01-09-2008, 01:36 PM	#16 (permalink)
joeyw Join Date: Jan 2008	Thanks stuartmp74. I am new to RC helicopters, already crashed my first one several times. So I ordered G4 and must say that I am happy with it. The 600 model you posted above seems to be a lot better than the helis included, can anyone with experience comment on how realistic it is compared to the real model?

01-10-2008, 10:05 AM	#17 (permalink)
fsusmithc2 Registered Users My HF Map location Join Date: Feb 2007	Always willing to go the extra mile Stuart. Kudos to you! It's fun for me just imagining how many people are flying my model around (the red one for those curious). As an extra treat, if anyone has seen the newest (February) issue of RC Heli Mag, they have an article on using sims and the screeen grabs they took for their pictures are of Real Flight with my red T-Rex 600N as they model they were flying. It's a bit fuzzy but you can see where my Spektrum decal is in the yellow part. There's also a white O.S. decal on the red part in between the Align white painted logos but that's really hard to make out in the magazine pictures. But download this model and fly it close and you'll see. I may not be famous but at least my model is. Thanks again Stuart! __________________ AMA 879592 - IRCHA 3241

01-17-2008, 06:32 AM	#18 (permalink)
zeddan78 Join Date: Aug 2007	hi...i tried to play the trex 600n on the 3.5 but i cant seem to play it because it says OS 50 sx unable or something. pls help!

01-17-2008, 05:15 PM	#19 (permalink)
alanhf Registered Users Join Date: Mar 2007	600 Electric variant Any chance of modding this to 600 Electric, please?

01-28-2008, 09:13 AM	#20 (permalink)
Mike Fortin My HF Map location Join Date: Apr 2004	I have actually been flying the V9 for a few months now and really enjoy it on G3.5. I have made a few mods of my own but the model flys great.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in