3gx programming help

[tarsam]

hy all,

its the first time i post something on the forum so i introduce myself, i am sam 19 years old, and i just bought an align trex 450 pro 3d.
i will do my best for typing english as good as i can haha...
I have some problems with programming the 3gx fbl system. i will explain my problem. first the setup of my heli. maybe that would be interesting for you.

esc : phoenix ice 50
motor : align RCM-BL450MX 3400kv
swash servo's : 3x SAVOX sh-0257 MG
tailservo : align ds520
flybarless : 3GX

now, the problem is, on another forum they said that i may not program expo in my tx for aileron elevator and the tail. so i didnt do that. And for pitch by full throttle i have 13° and by zero throttle -7° and for aileron and elevator i've got 8°.
then i programmed the 3gx like they said on that other forum and test the heli but he is much to sensitive. if i just touch the rudder stick, the heli turns almost 180° in HH and if i only touch the aileron and elevator stick the heli turns almost upside down, i may not touch the sticks. he's almost uncontrollable.
i can fly heli's with nose in and flying circles, but thats all. i am still learning so the heli is much to sensitive for me now.

that are my parameters in the 3gx for the moment, maybe one of yours can see what's wrong in the 3gx:

flight mode parameter1
flight codition control = 50
collective pitch elev precompensation =50
cyclic ring = 85
cyclic pitch exponential setting =2

flight mode parameter 2:
elevator flip rate adjustment = 70
aileron rate adjustment = 50
elevator travel limit = 70
aileron travel limit = 70
collective pitch dampening =0
cyclic pitch dampening = 0
collective pitch acceleration = 0
cyclic pitch acceleration = 0

rudder parameters
rudder locking gain adjustment = 70
collective pitch torque precompenation = 50
anti torque compensation = 20

en dan
setting display:
aileron travel limit = 35
elevator travel limit = 30
rudder travel left limit = -34
rudder delay command =10
aileron sensitivity = 54
elevator gain = 52
rudder travel right limit = 43
rudder gain = 40

i hope you can find the fault why he is so sensitive

greetings

[ferebeed]

On flight mode 1. The last one is on 2. Put it at 0. Then you can use expo in you radio if you are running V3.0 or 3.1.
Also you can use D/R only in the tail.