Register Now

Rogue22 · 07-06-2009, 06:22 PM

I recently installed 3 5065MG servos in a Blade 400 Helicopter. Two of the servos seem to have a slight buzz very frequently. I do not think they are binding in any way, although I can move the TX sticks to random positions and the buzz disappears. I can also pull slightly on the pushrods and the buzz will often go away, or at least for a short period of time.

Is this normal? It is not a loud buzz, but I just wonder what I can do to fix it if it is a problem.

Thank you for suggestions!

Steve

Pinecone · 07-09-2009, 07:24 AM

Digitals will buzz a bit. If the buzz is too loud, yo uhave binding and need to fix it.

I tend to say, happy digitals happily buzz/chatter a bit to tell you they are happy.

Rogue22 · 07-11-2009, 07:30 PM

Thanks Terry! In that case, my servos are happy.

Looking forward to getting the Blade 400 in the air, just wanted to be sure nothing was wrong.

Thanks again.

STeve

Montana · 02-10-2011, 01:37 PM

Would it be any benefit to buy a programmer to open up the deadband to stop the buzz?

velocity90 · 02-21-2011, 12:36 PM

I don't know about that one but you def want to use it to set the overload function to on...

07-06-2009, 06:22 PM	#1 (permalink)
Rogue22 Registered Users Join Date: Jan 2009 Location: South Florida	5065MG Buzz I recently installed 3 5065MG servos in a Blade 400 Helicopter. Two of the servos seem to have a slight buzz very frequently. I do not think they are binding in any way, although I can move the TX sticks to random positions and the buzz disappears. I can also pull slightly on the pushrods and the buzz will often go away, or at least for a short period of time. Is this normal? It is not a loud buzz, but I just wonder what I can do to fix it if it is a problem. Thank you for suggestions! Steve __________________ SAB Goblin 700 Sport, 700 Krakens, 420, 580, 700 Raw, Whiplash-G2 and Goosky S2; JETI DS-24 and VControl EVO

07-09-2009, 07:24 AM	#2 (permalink)
Pinecone Registered Users Join Date: Sep 2006	Digitals will buzz a bit. If the buzz is too loud, yo uhave binding and need to fix it. I tend to say, happy digitals happily buzz/chatter a bit to tell you they are happy. __________________ Terry AMA#47402, IRCHA # 3395 Blade CP "Pro", Trex 450SE, PiccoZ, Quick of Japan EP8v2 EX, Hurricane 550, Hurricane 200, JR Vibe 50, Blade mCX, Bergen Intrepid Gasser, Pantera 50, Blade mSR, Novus CP

07-11-2009, 07:30 PM	#3 (permalink)
Rogue22 Registered Users Thread Starter Join Date: Jan 2009 Location: South Florida	Thanks Terry! In that case, my servos are happy. Looking forward to getting the Blade 400 in the air, just wanted to be sure nothing was wrong. Thanks again. STeve __________________ SAB Goblin 700 Sport, 700 Krakens, 420, 580, 700 Raw, Whiplash-G2 and Goosky S2; JETI DS-24 and VControl EVO

02-21-2011, 12:36 PM	#5 (permalink)
velocity90 Registered Users Join Date: Aug 2010	I don't know about that one but you def want to use it to set the overload function to on... __________________ -TT E700 V2-vbar-mks950-980-Kosmik 160HV-Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+Spirit Pro

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-10-2011, 01:37 PM	#4 (permalink)
Montana Registered Users Join Date: Apr 2010	Would it be any benefit to buy a programmer to open up the deadband to stop the buzz?

Register Now

Log-in