Flight videos - Helis w/ MICROBEAST - Post them here!

[nexgen]

heres a couple BeastX test flight videos

of a Trex 250 (6th bX flight)



and of a Gaui 550 (4th bX flight)

[dannylightning]

[ame]http://www.youtube.com/watch?v=Ed2dPP57vt0[/ame]

[user23]

[ame]http://www.youtube.com/watch?v=8K4uYaP3IlQ[/ame]

trex 700 n 13+ -13 12

[Martin Larsen]

[ame]http://www.youtube.com/watch?v=S5Vkau6cD74[/ame]

[airjawed]

Originally Posted by Martin Larsen

http://www.youtube.com/watch?v=S5Vkau6cD74

What happened at the end?

Is that a BeastX or a Vbar?

[Martin Larsen]

The battery connector fell off in the tick tocks at the end.

I used beastx here in the video, I've now switched to vbar.

[Ah Clem]

Nice Flying Martin!

[mguw]

Hi

a couple of flight of my friend Ugo.

Microbeast MKS DS95 YGE 60A

[ame]http://www.youtube.com/watch?v=IuhOp7uvSeQ[/ame]

[ame]http://www.youtube.com/watch?v=UGUONxSso4c[/ame]

regards
Marcel

[theflyingeagle]

[ame]http://vimeo.com/21253448[/ame]

This is my Protos, running InoLab 251 servo's on the cyclic on 165 Hz.
On the tail a MKS DS760......

[sutty]

Hi Guys

Was really just making a test with a new hat cam set-up, which hasn't turned out as well as I'd hoped, but anyway since it is a video of my 250, with a MB in action, I guess I may as well post it.

Go easy, I know it is a little frenetic, but not too bad for a 250 I don't think, and I am getting more controlled, slowly but surely.



Cheers

Sutty

[airjawed]

Originally Posted by sutty

Hi Guys

Was really just making a test with a new hat cam set-up, which hasn't turned out as well as I'd hoped, but anyway since it is a video of my 250, with a MB in action, I guess I may as well post it.

Go easy, I know it is a little frenetic, but not too bad for a 250 I don't think, and I am getting more controlled, slowly but surely.



Cheers

Sutty

Nice! I like how you came close at around 1:00 but then you got right back to it! Must say that this is one of the best 250 vids!

[sutty]

Thanks airjawed, that's kind of you to say, and I'm glad you liked it, but I know it can still get a lot more controlled, especially from what I have seen from real pilots. To be honest I was a little shy of posting it in here, so your comments are doubly pleasing. As for getting right back to it, well, no point getting scared with a 250 right, I leave that for the 600, it scares me witless. So much so that I can't really fly it for nerves. I've decided that this summer will be the one where I conquer them, so I don't let the 250 worry me at all, since I know I have some 'future moments' planned for the 600, doh.

Even my 450 pro, on which I also have a MB, makes me nervous still, and I fly it just like the 250, hopefully a little better, as eveything is easier on that, but even when I have a nearly with the 450, I just carry on. I know that it will be even easier on the 600, in fact I tried it for the first time properly last week, flips, tick tocks, some piro flips, but, I can't even say I enjoyed it, I was soooooo nervous. This is not a joke, my legs and head were shaking, so you can imagine what my hands were like, as they are shaky at the best of times, without adrenaline. If my hands didn't have a vice like grip on the transmitter, it would have been shaken out of my hands. I hope I can crack it soon, or it will be 250 and 450s only for me.

Thanks again.

Cheers

Sutty

[nexgen]

Gaui X5 BeastX and Gaui pilot Al Austria




Sent from my brain using technology.

[Helico-pteron]

Here's a short one. The videographer had a new camera and unfortunately the focus is dodgy and then the battery quit. It was also 30 mph winds and the MB was stable as per usual.


[ame]http://www.youtube.com/watch?v=jUZQoBQU0mA[/ame]

[Zaaaguy72]

I hate Allen Austria!!! Haha!

He is just getting better and better. Have you seen his pirouetting tic toc's, they are coming along very nice. Wish I had 1/4 of his skill.

[nexgen]

doing some blade stops with the gaui 200. it was really windy but the BeastX didnt seem to mind. also it held orientation really well when it spooled back up, even inverted.

[airjawed]

Originally Posted by nexgen

doing some blade stops with the gaui 200. it was really windy but the BeastX didnt seem to mind. also it held orientation really well when it spooled back up, even inverted.

Is that a baseball field? Watch out for the sand getting into the bearings. I drove my rc truck on a field once and it ruined all my bearings after one drive. Not sure if all the sand is the same but I avoid sand completely now.

Nice flying by the way...

[Lynx.1677]

Here's a little vid of my 250 with BeastX from last year. Who put that tree there! Lol.

[ame]http://www.youtube.com/watch?v=h4wbDYl8ABU[/ame]

[janol]

Originally Posted by Lynx.1677

Here's a little vid of my 250 with BeastX from last year. Who put that tree there! Lol.

http://www.youtube.com/watch?v=h4wbDYl8ABU

I have to say I really enjoyed watching that flight, very nice

[LewdSkywalker]

some sports flying with my newly converted Hirobo SDX FBL using Microbeast

SDX flybarless using Beast X (5 min 10 sec)

Hirobo SDX, stock head converted to FBL, 135deg
Align 55H engine, Funtech 50 muffler, Team Savox 30% nitro
Futaba S9255s cyclic, BLS251 tail @ 5V, TP 1800mAh, Hobbywing 8A UBEC
Edge 603mm FBL mains, 95mm MSC tails
Futaba 12Z + R6008HS, Align RCE-G600 governor 1950rpm (idle2)
Pitch range (+/-15max), +13/-13 (idle2)

Microbeast:
9255- 165Hz, BLS251- 333Hz, default settings except "extreme" on control behavior
all pots at MID, tail gain (tx) at 50%

conversion details here https://www.helifreak.com/showthread.php?t=304417