Register Now

Bart101 · 01-17-2011, 01:10 PM

Hi everyone,

Another quick question!

Can I use the BL9180's on my 8V FBL setup?? Or are these servos not really designed for FBL use?

Cheers,
Shaun.

Foxden · 01-17-2011, 04:13 PM

Shaun,

All the team guys are running either 9080's, 9088's, 9180's or 9188's all on 2S straight, these servo's were designed from the get go to be used on 7.4 v

No problem running them with your FBL system as well., we run a set of 9080's with a SK720 straight, unregulated.

Bart101 · 01-17-2011, 04:47 PM

Thanks Clyde!

I know the servos are 8V servos... But I didn't know if they were OK to use with a FBL system!

But you've cleared that up for me, thanks!

Cheers,
Shaun.

Foxden · 01-17-2011, 05:37 PM

No problem,

get er built and go have some fun

fusionsx00 · 01-21-2011, 06:23 AM

Im running 9080's cyclic and 9188 tail
and im going to run a seperate 2s pack to the servos on a sk720
im trying to find out how many mah's I will need per flight
For the servo lipo.
Its on a gaui 425 cf,x5 head,504 motor 6s to the motor, esc bec disabled
2950 mah for the motor, moderate to heavy 3d,

01-17-2011, 01:10 PM	#1 (permalink)
Bart101 Closed Account Join Date: Jan 2009	TORQ - BL 9180 & FBL?? Hi everyone, Another quick question! Can I use the BL9180's on my 8V FBL setup?? Or are these servos not really designed for FBL use? Cheers, Shaun.

01-17-2011, 04:13 PM	#2 (permalink)
Foxden Registered Users My HF Map location Join Date: Jul 2004	Shaun, All the team guys are running either 9080's, 9088's, 9180's or 9188's all on 2S straight, these servo's were designed from the get go to be used on 7.4 v No problem running them with your FBL system as well., we run a set of 9080's with a SK720 straight, unregulated. __________________ *Clyde Fox* *Port Charlotte, FL.* Team Rotorworkz/Outrage

01-17-2011, 05:37 PM	#4 (permalink)
Foxden Registered Users My HF Map location Join Date: Jul 2004	No problem, get er built and go have some fun __________________ *Clyde Fox* *Port Charlotte, FL.* Team Rotorworkz/Outrage

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-17-2011, 04:47 PM	#3 (permalink)
Bart101 Closed Account Thread Starter Join Date: Jan 2009	Thanks Clyde! I know the servos are 8V servos... But I didn't know if they were OK to use with a FBL system! But you've cleared that up for me, thanks! Cheers, Shaun.

01-21-2011, 06:23 AM	#5 (permalink)
fusionsx00 Registered Users Join Date: Sep 2010	Im running 9080's cyclic and 9188 tail and im going to run a seperate 2s pack to the servos on a sk720 im trying to find out how many mah's I will need per flight For the servo lipo. Its on a gaui 425 cf,x5 head,504 motor 6s to the motor, esc bec disabled 2950 mah for the motor, moderate to heavy 3d,

Register Now

Log-in