Register Now

AtTheCross · 07-22-2009, 01:31 AM

Quote:

Originally Posted by PittJitsu

Miami You Mother :""*%@#*^%!!!!!

What did I do to you? Because of you, the electric and gas bill will be yet again late this month.. I had to order one.. Thanks..... I guess...:o

yikes, and i thought i had helicrack bad

PittJitsu · 07-22-2009, 02:04 AM

This has been a very hard hobby to enter into for me. You see all the different birds on YouTube and your thinking that yours must be broken because the one in the video seems to fly inverted, tic toc to barrel roll, just fine within that guys 6x8 kitchen.

Same with the big ones You buy something, need help here and within 4 min, you get replies like. that's a nice toy, bit to fix the broken feathering shaft, it will cost more than you just buying a Trex5-600.. So you do.. Then You ask about where to buy an align canopy for your proud new investment and you get.. " V1? V2? Your not trying to piece together that old thing are you?".. Its about shafts Pitt, Shafts.. And besides.. for the money it will cost to find a V2 canopy which by the way, people will laugh at, you should just buy a Rave Youngblood with Helicommand...

So Now? I WAIT! I will gladly buy these pocket rockets ( although this one was more than I expected) but I think Helis will be taking a HUGE turn soon. No flybar, shaft driven and with that will come more affordable FBLS Gyros. But then again, My dad told me that by the time I got my Licence, we would all be taking the test in hovercrafts.

Steve Joblin · 07-22-2009, 07:44 AM

Man! That didn't take long at all... places are listing it for Pre-order already! ClubHeli has it for $289... http://clubheli.com/Walkera4G6BRUSHL...ansmitter.aspx

I put my order in!

jbeauvil001 · 07-22-2009, 07:55 AM

woohoo thats awesome. will these first few come with the 2801 PRO you think? seems like they would want to get rid of the other ones first. i think ill wait before jumping in. just to see how you guys like them. so when you get them, PLEASE post some reports and comments about them. they seem incredible

Also. at club heli the description says belt drive, not shaft drive. which is right? i personally would like a belt drive more to avoid breakage problems and make it a tougher little sucker

Rick Hauler · 07-22-2009, 08:24 AM

jbeauvil001,
They will be coming with the PRO. As for the tail, it is a shaft drive...(SORRY! Our heli formats are the same so I cut and paste from a different heli...) Apologize for the confusion. It would need to be a tiny belt to fit through the tail boom! Thanks for the heads up...

miamiheli · 07-22-2009, 09:23 AM

Quote:

Originally Posted by WalkeraUS

jbeauvil001,
They will be coming with the PRO. As for the tail, it is a shaft drive...(SORRY! Our heli formats are the same so I cut and paste from a different heli...) Apologize for the confusion. It would need to be a tiny belt to fit through the tail boom! Thanks for the heads up...

I was wondering about that too. Good call.

What is the difference from PRO to the 2801E? I know the E has full range.

It would be nice if they put throttle hold in the "right" place.

miamiheli · 07-22-2009, 09:27 AM

Quote:

Originally Posted by PittJitsu

Miami You Mother :""*%@#*^%!!!!!

What did I do to you? Because of you, the electric and gas bill will be yet again late this month.. I had to order one.. Thanks..... I guess...:o

Sorry about that....we'll see how long I can hold out.

Just got my 4g3 flying well a week ago with the brushless motor.

For the price including the 2801, it is a pretty sweet deal for the 4g6.

I just bought a large tank for my dual sport motorcycle.....must hold off on heli stuff.....must hold off on heli stuff.....that only works for so long but I have to keep thinking it.

jbeauvil001 · 07-22-2009, 09:56 AM

thanks for the clarification WalkeraUS. appreciate it. I think i'll wait for the second batch though. just in case people are disappointed by it, which i doubt. or maybe i just wont be able to hold off and will have to pre order haha

linkahwai · 07-22-2009, 10:52 AM

I think better to wait for second batch. The first batch is always dissapointing, from the previous experiences with walkera. They might have a lot of problems and they will end up with lot of upgrade very soon after first batch.

SQRT(-2) · 07-22-2009, 11:12 AM

It uses the same reciever and motor I see.

But Helis must be like computers, no matter which one you buy, there is another cooler, better one just around the corner. At least it looks like a lot of the 4g3 parts will work on it, so parts that don't involve the tail or the frame should be easy.

Rick Hauler · 07-22-2009, 11:23 AM

You nailed it on the head. I don't expect many problems with the first batch. It's been in developement for quite some time. If you wait for the next best thing, you'll never get one! The way Walkera pumps them out, the 4G8 is only 4 months away..

(that's a joke! No 4G8 news!)

PittJitsu · 07-22-2009, 02:33 PM

This Just In.... The 4G8 Is on its way!~

miamiheli · 07-22-2009, 03:58 PM

Quote:

Originally Posted by PittJitsu

This Just In.... The 4G8 Is on its way!~

Careful, somone wil miss the joke and this will spin out of control.

Steve Joblin · 07-22-2009, 07:38 PM

I heard that there as a 4G8#A planned that will have a CNC canopy!

Raynman · 07-22-2009, 09:05 PM

I was thinking of getting the 43G version - read a write up on it & changed my mind! Maybe if it was BNF I would seriously look into it.

Greylen · 07-25-2009, 08:22 AM

In the pictures of the 4G6 and video it shows a plastic head flying but at the end of the video they show a close up of an aluminum head.
Which is it?

miamiheli · 07-25-2009, 08:51 AM

Quote:

Originally Posted by Greylen

In the pictures of the 4G6 and video it shows a plastic head flying but at the end of the video they show a close up of an aluminum head.
Which is it?

Good catch, most of the pictures are plastic head.

The pre-order at clubheli says full alum cnc head.

helidude3 · 07-27-2009, 12:13 PM

I am waiting for the eflite mcp. It will mosst likely use their ar6100 board with external servos/gyros hopefully w/ BL.

miamiheli · 07-27-2009, 12:26 PM

Quote:

Originally Posted by helidude3

I am waiting for the eflite mcp. It will mosst likely use their ar6100 board with external servos/gyros hopefully w/ BL.

That would be nice and seems like they will do it but still just a rumor isn't it?

SARdoc · 07-27-2009, 03:13 PM

I was reading on it and it doesn't really say, Is it going to have a Rate Gyro or a HH gyro? All it says is Independent.

07-22-2009, 02:04 AM	#42 (permalink)
PittJitsu Registered Users Join Date: May 2009	This has been a very hard hobby to enter into for me. You see all the different birds on YouTube and your thinking that yours must be broken because the one in the video seems to fly inverted, tic toc to barrel roll, just fine within that guys 6x8 kitchen. Same with the big ones You buy something, need help here and within 4 min, you get replies like. that's a nice toy, bit to fix the broken feathering shaft, it will cost more than you just buying a Trex5-600.. So you do.. Then You ask about where to buy an align canopy for your proud new investment and you get.. " V1? V2? Your not trying to piece together that old thing are you?".. Its about shafts Pitt, Shafts.. And besides.. for the money it will cost to find a V2 canopy which by the way, people will laugh at, you should just buy a Rave Youngblood with Helicommand... So Now? I WAIT! I will gladly buy these pocket rockets ( although this one was more than I expected) but I think Helis will be taking a HUGE turn soon. No flybar, shaft driven and with that will come more affordable FBLS Gyros. But then again, My dad told me that by the time I got my Licence, we would all be taking the test in hovercrafts. Last edited by PittJitsu; 07-22-2009 at 02:29 AM.. Reason: double post

07-22-2009, 08:24 AM	#45 (permalink)
Rick Hauler Registered Users Join Date: Mar 2009	jbeauvil001, They will be coming with the PRO. As for the tail, it is a shaft drive...(SORRY! Our heli formats are the same so I cut and paste from a different heli...) Apologize for the confusion. It would need to be a tiny belt to fit through the tail boom! Thanks for the heads up... __________________ Gaui X5 FES, Gaui 425 FBL, Gaui X2, Outrage Fusion 50 www.ClubHeli.com

07-22-2009, 10:52 AM	#49 (permalink)
linkahwai Registered Users Thread Starter Join Date: Sep 2008	I think better to wait for second batch. The first batch is always dissapointing, from the previous experiences with walkera. They might have a lot of problems and they will end up with lot of upgrade very soon after first batch. __________________ Trex 250: RCM-BL250, RCE-BL15X, DS410, GP750+S3154, AR6100 Trex 450 Pro: RCM-BL430SP, RCE-BL35X, DS410M, GP750+DS520, AR6100E Trex 500 ESP: RCM-BL500L, RCE-BL60G, DS510, GP750+DS520, AR6200 http://linkahwai.blogspot.com/

07-22-2009, 11:12 AM	#50 (permalink)
SQRT(-2) Registered Users Join Date: Jan 2009	It uses the same reciever and motor I see. But Helis must be like computers, no matter which one you buy, there is another cooler, better one just around the corner. At least it looks like a lot of the 4g3 parts will work on it, so parts that don't involve the tail or the frame should be easy. __________________ Gaui Hurricane w/ 530mm blades & Robird G31 Walkera Super CP Walkera Devo 10 w/ Deviation

07-22-2009, 11:23 AM	#51 (permalink)
Rick Hauler Registered Users Join Date: Mar 2009	You nailed it on the head. I don't expect many problems with the first batch. It's been in developement for quite some time. If you wait for the next best thing, you'll never get one! The way Walkera pumps them out, the 4G8 is only 4 months away.. (that's a joke! No 4G8 news!) __________________ Gaui X5 FES, Gaui 425 FBL, Gaui X2, Outrage Fusion 50 www.ClubHeli.com

07-22-2009, 07:44 AM	#43 (permalink)
Steve Joblin Registered Users My HF Map location Join Date: Aug 2008	Man! That didn't take long at all... places are listing it for Pre-order already! ClubHeli has it for $289... http://clubheli.com/Walkera4G6BRUSHL...ansmitter.aspx I put my order in!

07-22-2009, 07:55 AM	#44 (permalink)
jbeauvil001 Registered Users My HF Map location Join Date: Apr 2009	woohoo thats awesome. will these first few come with the 2801 PRO you think? seems like they would want to get rid of the other ones first. i think ill wait before jumping in. just to see how you guys like them. so when you get them, PLEASE post some reports and comments about them. they seem incredible Also. at club heli the description says belt drive, not shaft drive. which is right? i personally would like a belt drive more to avoid breakage problems and make it a tougher little sucker

07-22-2009, 09:56 AM	#48 (permalink)
jbeauvil001 Registered Users My HF Map location Join Date: Apr 2009	thanks for the clarification WalkeraUS. appreciate it. I think i'll wait for the second batch though. just in case people are disappointed by it, which i doubt. or maybe i just wont be able to hold off and will have to pre order haha

07-22-2009, 02:33 PM	#52 (permalink)
PittJitsu Registered Users Join Date: May 2009	This Just In.... The 4G8 Is on its way!~

07-22-2009, 07:38 PM	#54 (permalink)
Steve Joblin Registered Users My HF Map location Join Date: Aug 2008	I heard that there as a 4G8#A planned that will have a CNC canopy!

07-22-2009, 09:05 PM	#55 (permalink)
Raynman Registered Users Join Date: Jan 2009	I was thinking of getting the 43G version - read a write up on it & changed my mind! Maybe if it was BNF I would seriously look into it.

07-25-2009, 08:22 AM	#56 (permalink)
Greylen My HF Map location Join Date: Jul 2009	In the pictures of the 4G6 and video it shows a plastic head flying but at the end of the video they show a close up of an aluminum head. Which is it?

07-27-2009, 12:13 PM	#58 (permalink)
helidude3 Registered Users My HF Map location Join Date: Jan 2009	I am waiting for the eflite mcp. It will mosst likely use their ar6100 board with external servos/gyros hopefully w/ BL. __________________ T-rex 250 Super Combo w/ hs-65mg's Blade cp pro: spectrum receiver, BL main, DD tail, Gyro www.bladecpupgrades.co.nr Blade cx2 E-flite 4-site

07-27-2009, 03:13 PM	#60 (permalink)
SARdoc Registered Users Join Date: Nov 2008	Gyro? I was reading on it and it doesn't really say, Is it going to have a Rate Gyro or a HH gyro? All it says is Independent.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in