Register Now

DPI_USA · 10-12-2014, 01:49 PM

New never used. Still in unopened box.

Asking $600 plus shipping.

Description below:

The new 470 Cobra is updated with the latest upgrades and new high performance blades.

The helicopter kit is 90% assembled and wired.
All you need to do is add your receiver and assemble the fuselage and install the mechanics.

Mechanics are 100% assembled.

*All the wiring has been installed at the factory including the 3 axis DJI NAZA controller. Note - You will need to program the DJI naza.

* Servos installed

* ESC and Motor installed

* DJI Naza 3 axis controller installed ( needs programing )

* Mechanics 100% assembled with electronics installed

* Includes Detailed Cockpit and LED navigation lights

* Highly detailed fiberglass fuselage painted and ready to assemble.

INCLUDES DJI NAZA H Installed ! $265 Value With the DJI Naza controller, flying the cobra will offer you precise and accurate stabilization. The Naza offers three main flight modes.

1. Normal mode, which acts just like any 3 axis gyro

2. Attitude mode, gives the pilot more stability and holds axis

3. GPS mode ( gps receiver sold separately ) Will hold position up to 15 mph winds hands off sticks. Auto Pilot return to home if signal is lost or pilot initiates manually.

You will need a min. 7ch radio system to use the DJI NAZA H

Helicopter requires:
6s battery Recommended size: 6s 1200mah up to 6s 2200mah
7Ch Controller and Receiver.

Windmanquebec · 10-13-2014, 08:26 AM

Can you tell us where you originally bought that complete it?

Is it heliartist kit?

DPI_USA · 10-19-2014, 02:38 PM

SOLD.

10-12-2014, 01:49 PM	#1 (permalink)
DPI_USA Join Date: Jul 2012	470 Size AH-1W SuperScaleCobra (Grey) Includes DJI NAZA New never used. Still in unopened box. Asking $600 plus shipping. Description below: The new 470 Cobra is updated with the latest upgrades and new high performance blades. The helicopter kit is 90% assembled and wired. All you need to do is add your receiver and assemble the fuselage and install the mechanics. Mechanics are 100% assembled. All the wiring has been installed at the factory including the 3 axis DJI NAZA controller. Note - You will need to program the DJI naza. Servos installed * ESC and Motor installed * DJI Naza 3 axis controller installed ( needs programing ) * Mechanics 100% assembled with electronics installed * Includes Detailed Cockpit and LED navigation lights * Highly detailed fiberglass fuselage painted and ready to assemble. INCLUDES DJI NAZA H Installed ! $265 Value With the DJI Naza controller, flying the cobra will offer you precise and accurate stabilization. The Naza offers three main flight modes. 1. Normal mode, which acts just like any 3 axis gyro 2. Attitude mode, gives the pilot more stability and holds axis 3. GPS mode ( gps receiver sold separately ) Will hold position up to 15 mph winds hands off sticks. Auto Pilot return to home if signal is lost or pilot initiates manually. You will need a min. 7ch radio system to use the DJI NAZA H Helicopter requires: 6s battery Recommended size: 6s 1200mah up to 6s 2200mah 7Ch Controller and Receiver. Attached Thumbnails

10-13-2014, 08:26 AM	#2 (permalink)
Windmanquebec Registered Users My HF Map location Join Date: Jan 2012	Can you tell us where you originally bought that complete it? Is it heliartist kit? __________________ SYMA S-107/BLADE (2)450 3D FBL/ALIGN(3)T-REX 500 (2)T-REX 550 T-REX 700L V2/DX8 SCALE MD500(450) UH-60/AS350/BO105(500) A109(600)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-19-2014, 02:38 PM	#3 (permalink)
DPI_USA Thread Starter Join Date: Jul 2012	SOLD.

Register Now

Log-in