Register Now

Stevendavis · 10-23-2023, 08:47 AM

I have a Roban B-412 to get together. I'll post some pics of the process.

Stevendavis · 10-27-2023, 08:53 AM

Got the nav lights and covers glued in.

Stevendavis · 11-19-2023, 09:21 AM

Working on getting the interior done and the instructions are lacking here. I found out that you have to connect the two white/red lines together for the dash lights and power them seperately. The nav lights are seperate from the dash lights with their own system.

The recomended pitch is -3 to +10, but nothing is said about Aileron and Elevator deflection. I was thinking +/- 8* ??? Does this sound right? Thanks.

Trooper7 · 11-19-2023, 10:56 PM

If they only specify Collective and aren't specifying Cyclic pitch limits (and your FBL does not require such) then just set the cyclic limits to ensure the swash plate doesn't bind up against the main shaft with full cyclic defections (stirring the cyclic) both at max and min Collective.

10-23-2023, 08:47 AM	#1 (permalink)
Stevendavis Registered Users Join Date: Oct 2009	New Roban Build I have a Roban B-412 to get together. I'll post some pics of the process. Attached Thumbnails __________________ Blade MCP-X Brushless, 300CFX, , Trex 450 Pro v2, Trex 600 ESP 6s 3GX v.3.1 and KDE head, Rotormast V-22, Futaba 12Z controle!!

10-27-2023, 08:53 AM	#2 (permalink)
Stevendavis Registered Users Thread Starter Join Date: Oct 2009	Got the nav lights and covers glued in. Attached Thumbnails BigEdge and Stormbringer like this. __________________ Blade MCP-X Brushless, 300CFX, , Trex 450 Pro v2, Trex 600 ESP 6s 3GX v.3.1 and KDE head, Rotormast V-22, Futaba 12Z controle!!

11-19-2023, 09:21 AM	#3 (permalink)
Stevendavis Registered Users Thread Starter Join Date: Oct 2009	Working on getting the interior done and the instructions are lacking here. I found out that you have to connect the two white/red lines together for the dash lights and power them seperately. The nav lights are seperate from the dash lights with their own system. The recomended pitch is -3 to +10, but nothing is said about Aileron and Elevator deflection. I was thinking +/- 8* ??? Does this sound right? Thanks. Attached Thumbnails Stormbringer likes this. __________________ Blade MCP-X Brushless, 300CFX, , Trex 450 Pro v2, Trex 600 ESP 6s 3GX v.3.1 and KDE head, Rotormast V-22, Futaba 12Z controle!!

11-19-2023, 10:56 PM	#4 (permalink)
Trooper7 Registered Users Join Date: Feb 2014 Location: Vancouver, BC	If they only specify Collective and aren't specifying Cyclic pitch limits (and your FBL does not require such) then just set the cyclic limits to ensure the swash plate doesn't bind up against the main shaft with full cyclic defections (stirring the cyclic) both at max and min Collective. __________________ 1:4 MD500E - 700 MD500E - 700 B222 TREX 600ESP Last edited by Trooper7; 11-20-2023 at 01:11 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in