105mm tail blade on stock grips...

[kouasupra]

I know everybody recommends the quick UK tail grips for the 105mm. Will I be okay with the stock tail grip from mikado for awhile. I do light to mild 3D flying.

[Twister773]

I never had a problem

[kouasupra]

Originally Posted by Twister773

I never had a problem

I'm assuming this was on a logo 600 3d?

[Twister773]

600se sorry

[Big Fil]

Your ok to run the stock grips on an SE with 105s. Just don't exceed 1900rpm limit.

Where some get into problems is when they try to run 105s on a 6003d u at 2200-2300 rpm.

One other note is to not over torque the bolts holding the grips on. Use loctite and don't go gorilla on the bolt when tightening.

[kouasupra]

Originally Posted by Big Fil

Your ok to run the stock grips on an SE with 105s. Just don't exceed 1900rpm limit.

Where some get into problems is when they try to run 105s on a 6003d u at 2200-2300 rpm.

One other note is to not over torque the bolts holding the grips on. Use loctite and don't go gorilla on the bolt when tightening.

Makes sense fil! I'm only running 2000 HS on mine. I'm sure I'll get away with it.