Register Now

soulman · 12-22-2012, 12:31 PM

Hello guys,

I 've got the super combo logo 500 with the savox servos

With each servo there are 4 rubbers and 4 gold colored busses.
Do you need these things , or do you have to mount the servo without ???

Greetings ,
Gert.

michael88997 · 12-22-2012, 12:37 PM

I mounted mine with them because the screws may slip through the servos without them... They hold tight on my Heli with them

Andy from Sandy · 12-23-2012, 05:45 AM

I used them on my servos as I think it helps to centre them correctly.

soulman · 12-23-2012, 05:49 AM

Thank you guys.
My building is going on, with rainy days.

Gttahoe · 12-23-2012, 07:05 AM

Let me know when you get to the tail servo that's wher I'm having my issue. I'm on the third day trying to install.

soulman · 12-23-2012, 07:33 AM

Tail servo is not easy, but first put in the wire side.
Let` s say with a little corner of 10 degrees.
Then push servo to the front side of the heli, and it will plop in !

Succes

12-22-2012, 12:31 PM	#1 (permalink)
soulman Registered Users Join Date: Mar 2009	Super combo logo 500 servo mount Hello guys, I 've got the super combo logo 500 with the savox servos With each servo there are 4 rubbers and 4 gold colored busses. Do you need these things , or do you have to mount the servo without ??? Greetings , Gert. __________________ Futaba 6 ex Compass Atom 500 HD Cell 500 Oxy 5

12-23-2012, 05:49 AM	#4 (permalink)
soulman Registered Users Thread Starter Join Date: Mar 2009	Thank you guys. My building is going on, with rainy days. __________________ Futaba 6 ex Compass Atom 500 HD Cell 500 Oxy 5

12-23-2012, 07:33 AM	#6 (permalink)
soulman Registered Users Thread Starter Join Date: Mar 2009	Tail servo is not easy, but first put in the wire side. Let` s say with a little corner of 10 degrees. Then push servo to the front side of the heli, and it will plop in ! Succes __________________ Futaba 6 ex Compass Atom 500 HD Cell 500 Oxy 5

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-22-2012, 12:37 PM	#2 (permalink)
michael88997 Registered Users Join Date: Mar 2008 Location: Denton, TX	I mounted mine with them because the screws may slip through the servos without them... They hold tight on my Heli with them

12-23-2012, 05:45 AM	#3 (permalink)
Andy from Sandy Registered Users Join Date: Dec 2006	I used them on my servos as I think it helps to centre them correctly.

12-23-2012, 07:05 AM	#5 (permalink)
Gttahoe Registered Users Join Date: Nov 2010	Let me know when you get to the tail servo that's wher I'm having my issue. I'm on the third day trying to install.

Register Now

Log-in