Register Now

MeekaMoMo · 02-10-2015, 02:25 PM

Ive got a Chase 360 on the way its coming with the Hobbywing motor and esc,but thinking of trying it with the Align MX 460 3200kv 3s, motor whats your thoughts on that please,many thank's,Marty

JaggedEdge · 02-10-2015, 02:28 PM

Half the voltage, twice the KV.
Sounds good to me.

MeekaMoMo · 02-10-2015, 02:48 PM

Quote:

Originally Posted by JaggedEdge

Half the voltage, twice the KV.
Sounds good to me.

Thanks for that may give it a go,Marty,

PeteStewardson · 02-11-2015, 03:15 AM

You'll be about 600Kv short of the standard setup, the 6s motor is 1880Kv but it shoudl be ok if you run it with the 19T pinion

MeekaMoMo · 02-11-2015, 06:18 AM

Thank you for that Pete,will give it a go

MeekaMoMo · 02-11-2015, 06:43 AM

Thank you for that Pete,will give it a go

jmtyndall · 02-12-2015, 08:15 PM

With 18t, on a fresh pack you'll be turning 3000rpm, and only 2700 end of pack.

With 19t those go up to 3200/2850

If you're okay with these headspeeds you should be fine. But if you already have the Scorpion 1880 motor coming, why not use it?

02-10-2015, 02:25 PM	#1 (permalink)
MeekaMoMo Registered Users Join Date: Mar 2009	3s with Align 460mx-3200kv motor what you think Ive got a Chase 360 on the way its coming with the Hobbywing motor and esc,but thinking of trying it with the Align MX 460 3200kv 3s, motor whats your thoughts on that please,many thank's,Marty __________________ Align 470M,stock motor,Kontoniks 60 amp esc,Futaba 760r gyro,Theta 921 cyclic servos and Theta Sabre T1 tail servo.

02-10-2015, 02:28 PM	#2 (permalink)
JaggedEdge Registered Users Join Date: Dec 2007	Half the voltage, twice the KV. Sounds good to me. __________________ -TREX600NSP - TREX500ESP -TREX450FBL - TREX250 - CHP GAUI 550 - OXY3 - 30% EG Aircraft MX2 DLE55 -

02-11-2015, 06:18 AM	#5 (permalink)
MeekaMoMo Registered Users Thread Starter Join Date: Mar 2009	Thank you for that Pete,will give it a go __________________ Align 470M,stock motor,Kontoniks 60 amp esc,Futaba 760r gyro,Theta 921 cyclic servos and Theta Sabre T1 tail servo.

02-11-2015, 06:43 AM	#6 (permalink)
MeekaMoMo Registered Users Thread Starter Join Date: Mar 2009	Thank you for that Pete,will give it a go __________________ Align 470M,stock motor,Kontoniks 60 amp esc,Futaba 760r gyro,Theta 921 cyclic servos and Theta Sabre T1 tail servo.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-11-2015, 03:15 AM	#4 (permalink)
PeteStewardson Registered Users Join Date: Jan 2011	You'll be about 600Kv short of the standard setup, the 6s motor is 1880Kv but it shoudl be ok if you run it with the 19T pinion

02-12-2015, 08:15 PM	#7 (permalink)
jmtyndall Registered Users Join Date: Aug 2011	With 18t, on a fresh pack you'll be turning 3000rpm, and only 2700 end of pack. With 19t those go up to 3200/2850 If you're okay with these headspeeds you should be fine. But if you already have the Scorpion 1880 motor coming, why not use it?

Register Now

Log-in