Register Now

alcangie · 03-01-2013, 03:14 AM

Hi all

I got tired of braking the stock swash plate arms in crashes, so I decided to reinforce it with a piece of aluminum, as you can see in photos below. I removed the swash from the heli and outlined the swash on aluminum with a pencil. Then i cut the aluminum to the drawn shape. I glued it to the swash and also used some thread and CA to secure the aluminum plate to the swash. So far it works great. Of course it is now heavier than before, but i have a brushless nano, so this is not a big problem.

utrinque · 03-01-2013, 11:31 AM

RKH swash should be very crash resistant. Free worldwide shipping.

http://www.rakonheli.com/rkh/index.p...emart&Itemid=1
http://www.44ghz.com/nano-cpx-upgrad...d-head-review/

03-01-2013, 03:14 AM	#1 (permalink)
alcangie Registered Users Join Date: Feb 2011	Reinforcing the swash plate Hi all I got tired of braking the stock swash plate arms in crashes, so I decided to reinforce it with a piece of aluminum, as you can see in photos below. I removed the swash from the heli and outlined the swash on aluminum with a pencil. Then i cut the aluminum to the drawn shape. I glued it to the swash and also used some thread and CA to secure the aluminum plate to the swash. So far it works great. Of course it is now heavier than before, but i have a brushless nano, so this is not a big problem. __________________ MSH Prôtos 500: FBL, savox, beastX Blade 400 3D,Hitec HS65mg, Spartan Quark, Hitec 5084MG, Align 35A X esc Blade Mcpx-brushless, SR-120 tail Blade nano cpx, brushless nanoheli kit

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-01-2013, 11:31 AM	#2 (permalink)
utrinque Join Date: Feb 2011	RKH swash should be very crash resistant. Free worldwide shipping. http://www.rakonheli.com/rkh/index.p...emart&Itemid=1 http://www.44ghz.com/nano-cpx-upgrad...d-head-review/

Register Now

Log-in