Register Now

kevinww · 09-19-2009, 01:56 PM

I was at the Southern Model Airshow today and one of the pilots flying was Dave Fisher, went had a chat with him, then had a good look at his Avro. After about 20 seconds it suddenly hit me that there were no paddles or flybar. Closer inspection showed that the head block was the current updated version however it had absolutly no machining in it for the flybar to pass through or the cage bearings. Didn't have the camera with me and didn't get the chance to go back and talk to Dave about it as he was now busy. But from what I've seen the flybarless option isn't far away on the Avro. By the way it flew like a rocket ship on steroids.

Otatiaro · 02-18-2010, 05:58 AM

Hey,

In fact this is a prototype rotor hub ... as you said, it's just the original V2 hub without the machining for the flybar.

Neal sent me one some month ago, I have it on my FBL Avro.

Could take a pic or two.

++

aussiemick · 02-22-2010, 09:40 PM

Quote:

Originally Posted by Otatiaro

Neal sent me one some month ago, I have it on my FBL Avro.

Could take a pic or two.

++

Please do take and post a few phtos.

Mick

budgienutz · 02-27-2010, 04:18 PM

Quote:

Originally Posted by aussiemick

Please do take and post a few phtos.

Mick

cant believe you havent converted your avro mick.
ive been toying with the idea with mine for a while now

aussiemick · 02-27-2010, 11:26 PM

I have a VBar that I took off my 600N sitting around with the idea of converting the Avro to FBL (maybe wake it up a bit).

Still no rush though, I am considering selling the Avro, it doesnt get flown enough.

Mick

budgienutz · 03-07-2010, 03:20 PM

nore does mine

Quote:

Originally Posted by aussiemick

I
Still no rush though, I am considering selling the Avro, it doesnt get flown enough.

Mick

Czech-Dave · 04-09-2010, 03:08 PM

this is how mine looks like, except the swash-driver (Mikado) and different contoll-ball-lenghts all is stock........ and of course the ccanopy is not stock also

David

aussiemick · 04-09-2010, 05:59 PM

what does it weigh with out some of the head parts???
Mick

Otatiaro · 04-26-2010, 06:23 AM

Hello,

I'm selling my Avro (and my Robbe Millenium) with its AC-3X and electronics (ReactorX, MultiGov Pro, BLS 451 / 251, OS 91 HZ, hatori muffler), custom painted canopy (by Eddie Mollier Design, theme is the Ford Mustang), maniac blades, and accessories.

If interested, just send me a PM.

Best regards,
Thomas Legrand.

PS : the Avro is in France now.

09-19-2009, 01:56 PM	#1 (permalink)
kevinww Registered Users Join Date: Nov 2008	Flybarless Avro I was at the Southern Model Airshow today and one of the pilots flying was Dave Fisher, went had a chat with him, then had a good look at his Avro. After about 20 seconds it suddenly hit me that there were no paddles or flybar. Closer inspection showed that the head block was the current updated version however it had absolutly no machining in it for the flybar to pass through or the cage bearings. Didn't have the camera with me and didn't get the chance to go back and talk to Dave about it as he was now busy. But from what I've seen the flybarless option isn't far away on the Avro. By the way it flew like a rocket ship on steroids. __________________ Trex 600N Pro with Vibe 50 Head and YS91RS motor, Vibe 50 VBar FBL, Trex744 VBar FBL MW44 Turbine, Logo 800 XXTreme, Logo 600 12s, Logo 500SE, Vario UH-1D (Building), Scratch built 625mm Quad.

02-27-2010, 11:26 PM	#5 (permalink)
aussiemick Registered Users My HF Map location Join Date: Jul 2006	I have a VBar that I took off my 600N sitting around with the idea of converting the Avro to FBL (maybe wake it up a bit). Still no rush though, I am considering selling the Avro, it doesnt get flown enough. Mick __________________

04-09-2010, 03:08 PM	#7 (permalink)
Czech-Dave Registered Users Join Date: Jan 2007	this is how mine looks like, except the swash-driver (Mikado) and different contoll-ball-lenghts all is stock........ and of course the ccanopy is not stock also David Attached Thumbnails __________________ cdave

04-09-2010, 05:59 PM	#8 (permalink)
aussiemick Registered Users My HF Map location Join Date: Jul 2006	what does it weigh with out some of the head parts??? Mick __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-18-2010, 05:58 AM	#2 (permalink)
Otatiaro Registered Users My HF Map location Join Date: Oct 2007	Hey, In fact this is a prototype rotor hub ... as you said, it's just the original V2 hub without the machining for the flybar. Neal sent me one some month ago, I have it on my FBL Avro. Could take a pic or two. ++

04-26-2010, 06:23 AM	#9 (permalink)
Otatiaro Registered Users My HF Map location Join Date: Oct 2007	Hello, I'm selling my Avro (and my Robbe Millenium) with its AC-3X and electronics (ReactorX, MultiGov Pro, BLS 451 / 251, OS 91 HZ, hatori muffler), custom painted canopy (by Eddie Mollier Design, theme is the Ford Mustang), maniac blades, and accessories. If interested, just send me a PM. Best regards, Thomas Legrand. PS : the Avro is in France now.

Register Now

Log-in