START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
FMA/Revolectrix Product Support FMA/Revolectrix Factory Product Support |
|
LinkBack | Thread Tools | Display Modes |
06-23-2013, 03:55 PM | #1 (permalink) |
Registered Users
Join Date: Feb 2013
|
High Power Charge PL6
Hi,
I am using a 1000w 40amp ps and was wondering what is the best way to charge 6- 3s 2200mah revolectrix cells on a mpa board. I want to charge at a 2c rate should I set the charge amps to 4.40a and select 6p from the pop up menu or just set the charge rate at 26.4amps and let it charge as 1 cell? Thanks
__________________
120 SR, x2 nano CP X, mCP X BL, 300x Trex 450 pro DFC, 600 pro DFC upgraded / HC3SX JR X9503 Heli , DX9, Phoenix sim V4 |
Sponsored Links | |||
Advertisement |
|
06-23-2013, 04:29 PM | #2 (permalink) |
Registered Users
|
I would use the high power preset, then set the current to 4.4 amps. Then set the packs in parallel to 6. That way, the mah put back as well as the IR values will be averaged.
If you charge these six packs regularly, you can setup a preset with all these values set. Then all you have to do is press and hold start to start the charge.
__________________
Revolectrix Ambassador - Charger Specialist Revolectrix.com 10% discount for Batteries GCAM16 |
Thread Tools | |
Display Modes | |
|
|