Pool knob resolution.

[akschu]

Anyone notice that then the knobs are turned to full maximum that you need to rotate them counter-clockwise three notches before the output signal goes below 100%? I would expect to see every notch make a difference in output signal, but for some reason I don't.

I tried to calibrate to fix this issue and was able to get through the calibration just fine, but I still have the same problem.

Perhaps I'll post a video to explain better.

Thanks,
schu

[FrankFuss]

If you look at the Calib.jsn file you will see that the calibration for the P5-P8 potentiometers can result in Min and Max values of -4000 and 4000, which appears to be the lower and upper limits for calibration. I wonder if you manually edit this file and enter values smaller or larger than -4000 or 4000, would you get a greater active range for the control, but it may be outside the hardware capability.